Van điện từ DC 12V bằng nhựa cho điều khiển nước tại Lotte Market

Giới thiệu Van điện từ DC 12V bằng nhựa cho điều khiển nước tại Lotte Market

Features:
It is suitable for washing machine, drinking machine, garden sprinkler irrigation, etc.
The solenoid valve is a normally closed N/C solenoid valve.
Solenoid valves are made of high-quality plastic and brass materials with long service life.
Easy to install and replace damaged ones by a large margin.

Main technical indicators of products and matters needing attention:
1. Environmental Conditions for the Use of Low Pressure Solenoid Valve Intake Valve
1.1 Elevation not exceeding 2500 metres
1.2 Ambient temperature is 0-40°C
1.3 Relative humidity of air below 95% (temperature 25°C)
2. Type and rated technical parameters
Type 2.1: Guided (one-way) solenoid valve (also known as non-filling type guide valve action or solenoid valve)
2.2 rated voltage: DC12V
2.3 Rated Current: 12V-300mA
2.4 Working mode: Short-term quota system (i.e. intermittent periodic work system)
2.5 Insulation Class: Class E Insulation
2.6 Use of fluids: (0-55°C) water
2.7 Water pressure: 0.02-0.8 Mpa

Specifications:
Material: Plastics + Metals
Size: 6.5*3.3*5.5cm/2.56*1.38*2.17”

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow slight measuring deviation due to manual measurement.


Included:

1 XElectric Solenoid Valve