Thiết Bị Kiểm Tra Rò Rỉ Khí Gas / Máy Điều Hòa Siêu Âm Dajrhd 40khz tại Lotte Market

Giới thiệu Thiết Bị Kiểm Tra Rò Rỉ Khí Gas / Máy Điều Hòa Siêu Âm Dajrhd 40khz tại Lotte Market

Feature:
1. The trigger circuit is unique, and the control voltage is regulated accurately without hysteresis. After the resistive load is turned off to 0, it is adjusted from 10V after it is turned on, and adjusted to the maximum power voltage close to the input.
2. Thyristor adds RC absorption protection circuit.
3. Upgraded fan with switch intelligent control, good heat dissipation effect and long service life.
4. Standard high-grade exquisite aluminum shell is more safe and practical.
5. Upgrade the brand full copper 75A ultra-high current binding posts.
6. Super-high-power electronic voltage regulator, suitable for control of lighting engineering colored lights, heating wire, boiler heating control, electric tool motor, etc. The circuit design of this product is extremely advanced, triggering precise control, and good materials.

Specification:
Item Type: AC Voltage Regulator
Use Voltage: AC 110V-230V
Maximum Power: 10000W (resistive load)
Voltage Regulation: Ac 0V- adjustable between proximity input voltages
Instructions:
Connect the thyristor voltage regulator in front of the electrical circuit of the consumer, and connect the input and output wires respectively (without the zero-fire wire). Rotate the potentiometer knob to play light and dark dimming, speed, voltage, and temperature Role; very easy to use.
Application:
Using new bidirectional ultra-high power thyristor, thyristor standard 100A, resistive load can be adjusted arbitrarily between 0-input voltage for electrical appliances. Such as: electric furnaces, water heaters, lamps and lanterns, large motors and motors. So as to achieve the effects of dimming, temperature and pressure.
It can be used for large appliances with an electric power of less than 10,000 watts (pure resistive load). Because of the large power, ordinary household appliances or small factories are sufficient. (The inductive or capacitive load has a large starting current, which is 2-4 times the usual work. The power should be reduced during use, and it is best to leave less than half of the margin.)

Package List:
1 X SCR Voltage Regulator

Note:
Pay attention that the load cannot exceed the specified maximum power. Pay attention to the temperature rise for the first use. If the temperature is very high (more than 80 degrees), the heat dissipation must be strengthened, otherwise the module and the electrical appliances will be burned out. For a large reduction, at least half of the margin should be left.