Thiết bị kiểm tra dung lượng pin 5V Typec LCD MAh MWh 18650 tại Lotte Market

Giới thiệu Thiết bị kiểm tra dung lượng pin 5V Typec LCD MAh MWh 18650 tại Lotte Market

Specification:
Test voltage: ≤5V
Display mode: 128×64px LCD
Capacity range: 99999mAh
Energy range: 99999mWh
Timing range: 999:59:59
Working battery: flat head 18650 battery
Power interface: Type-C
External working power supply: 5V 1A (the power supply is self-provided, you can use the mobile phone charger). The charging mode (Charge) and automatic mode (AUTO-TEST) need to be connected to an external working power supply for normal use.
Product size: 115×81×31mm (product); 150×100×40mm (packaging),
Product weight: 110g (including packaging); net weight 74g
Safety Tips: The load resistor will release a high temperature of 60~80℃ during discharge. Keep ventilation during use, avoid close to flammable and explosive materials, and notify you to pay attention to safety and avoid burns.


Working mode (need to connect to 5V power supply)
AUTO-TEST automatic mode (boot default mode)
Start → charge (charge current is less than 0.12A, trigger full charge, stop charging) → discharge (load voltage is less than 2.7V, trigger discharge complete) → charge (charge current less than 0.12A trigger full charge, stop charging) → complete stop
①The capacity and energy values are not recorded during charging, only timing.
②Record the capacity and energy value when discharging, the same is timing.


CHARGE (charging mode)
Start → charge (the charging current is less than 0.12A to trigger full charge and stop charging) → complete stop
①Only record the charging time, not the charging capacity and energy

DISCHARGE (discharge mode)
Start → discharge (load voltage is less than 2.7V, trigger discharge is completed → complete stop)
①Record the discharge capacity, energy and time.


Note:
①As long as the discharge process detects that the battery load voltage drops to 2.7V, it will stop discharging. After the discharging is stopped, the battery will be no-load and the voltage will rise; a single discharge process can only detect that the voltage drops to 2.7V for the first time after the self-discharge starts and triggers the stop of the discharge. The capacity released by the first-stage battery can be simply understood as a single usable capacity, rather than the calibrated battery capacity.
② Shut down and restart; switch modes; long press the start button and the data are cleared, and the historical data will not be saved after shutdown.
③Test①Install 18650 battery for testing, Test②test through type-c external power bank or ≤5V power supply, but Test① and Test② cannot be used at the same time for testing, to avoid accidents caused by overshoot of 18650 battery without protection.
④To run the charging mode, an external power supply must be connected


Package includes:
1*battery capacity tester


Note:
1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures.
2.Please forgive 1 cm/0.39”-3 cm/1.18” measuring deviation due to manual measurement.