Notice: file_put_contents(): write of 4000 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 4000 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi

Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi tại Lotte Market

Thương hiệu: | Xem thêm Phụ kiện máy ảnh Thương hiệu  

Mô tả ngắn về Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi tại Lotte Market

#Remote #Control #433MHz #Wireless #Duplicator #2 #Button #Metal #Clone #Controller #Auto #Copy #Electric #Gates #Gadgets. 100% brand new and high quality. Delete the existing code of our remote duplicator. 2)Keep holding A button and release B button. Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED
: Còn hàng
: Shopee
35.837đ 59.455đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi tại Lotte Market

#Remote #Control #433MHz #Wireless #Duplicator #2 #Button #Metal #Clone #Controller #Auto #Copy #Electric #Gates #Gadgets Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi
Remote Control 433MHz Wireless Duplicator 2 Button Metal Clone Controller Auto Copy Electric Gates Gadgets Car Sunroofs Home Garage Curtain
100% brand new and high quality


Program Instructions:
1. Delete the existing code of our remote duplicator
1)Click and Hold A and B buttons together - Led will flash 3 times.Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi
2)Keep holding A button and release B button.
3)Keep holding A button and push B button 3 times, Led will start flashing Non-stop.
Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleteded !
2. Clone your original remote
1)Put both remotes Into back to Back position. Make sure they have direct contact.
2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks.
3)Blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi
If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.

Features:
High accuracy of copying and high effective of copying, faster copy data speed, not easy losing code.
Maximum control distance up to 100 meters in the open air.
Easy to use. The 2 channel remote control system allows you take control of your gadgets, car, home and garage.
Remote Control only, other accessories demo in the picture are not included!Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi

Tips:
1. The essential condition for the selection of the remote control;the copyed remote control operates normal,chip is compatible and frequency is correct.
2. Before buying ,please make sure the copyed remote control operating frequency or choose & buy the frequency adjustable type remote control.
3. Before buying,please confirm whether your remote control can be copyed or not.
4. The remote control can copy the fixed codes and learning codes. It can't copy original car remote control, two-way remote control and rolling code remote control (Rolling code chips start with HCS commonly,such as HCS200,HCS201,HCS300,HCS301,etc)

Specification:
Model: AK-KB1810
Material: ABS+Metal
Rated Voltage: 12V
Frequency: 433MHz
Wireless Communication: RF
Modulation: ASK (Amplitude Modulation)Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi
Wireless Transmitting Distance: 50-100m (Open Space)
Color: As Pictures Shown
Dimension: 5.2x3.4x1.2cm/ 2.05x1.34x0.47in
Quantity: 1 Pc

Note:
1.No retail package.Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi
2.Please allow 0-1cm error due to manual measurement. plz make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Remote Control

Chi Tiết Thiết bị điều khiển từ xa không dây 433MHz 2 nút bấm bằng kim loại cho gara xe hơi