Notice: file_put_contents(): write of 1963 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 1963 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
[TheVatifly] 0.96 Inch Serial OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board HOT

[TheVatifly] 0.96 Inch Serial OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board HOT tại Lotte Market

Thương hiệu: | Xem thêm Phụ Kiện Máy Tính Thương hiệu  

Mô tả ngắn về [TheVatifly] 0.96 Inch Serial OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board HOT tại Lotte Market

Product Description:. 2, visual Angle: greater than 160℃. 06W when normal display. 3V-5V two sets of voltage can be used. 6, small volume (length and width) : 26mm*26mm*3. Brightness and contrast can be controlled by program instructions. Built-in driver chip for OLED screen: SSD1315Z. Important: OLED display is different from LCD; OLED is self-luminous; So there is no backlight, in
: Còn hàng
: Shopee
42.800đ 82.600đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu [TheVatifly] 0.96 Inch Serial OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board HOT tại Lotte Market

Product Description:[TheVatifly] 0.96 Inch Serial OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board HOT



1, resolution: 128*64 (no backlight, display unit light)



2, visual Angle: greater than 160℃



3, low power consumption: 0.06W when normal display



4, wide power supply range: DC 3.3V-5V two sets of voltage can be used



5, industrial grade: working temperature -30℃~80℃



6, small volume (length and width) : 26mm*26mm*3.9mm



7. Communication mode: I2C or IIC[TheVatifly] 0.96 Inch Serial OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board HOT



8. Brightness and contrast can be controlled by program instructions



9, the service life is not less than 16,000 hours



10. Built-in driver chip for OLED screen: SSD1315Z



11, support many control chips: fully compatible with Arduino, 51 series, MSP430 series, STM32/, CSR chips, etc



Important: OLED display is different from LCD; OLED is self-luminous; So there is no backlight, in the case of only power will not have any response screen; There must be a program operating correctly to display

Chi Tiết [TheVatifly] 0.96 Inch Serial OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board HOT