Tấm thép 3 mặt 235mm phủ PEI hai mặt cho ga trải giường B Side 235mm tại Lotte Market
Thương hiệu: | Xem thêm Máy In 3D Thương hiệuMô tả ngắn về Tấm thép 3 mặt 235mm phủ PEI hai mặt cho ga trải giường B Side 235mm tại Lotte Market
Buildplate for Ender 3 Steel Sheet 235mm Two-sides Coated PEI Bed B Side 235mm. 100% brand new and high quality. Easy to remove by bending and popping it off, can repeatedly use, practical. Make adding inductive Z-probe possible. Number of Items:1 x PEI Build Steel Plate+Magnetic Base. Weight: 400g. Application: Ender 3 Printer. Wipe the print surface before and after: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Tấm thép 3 mặt 235mm phủ PEI hai mặt cho ga trải giường B Side 235mm tại Lotte Market
Buildplate for Ender 3 Steel Sheet 235mm Two-sides Coated PEI Bed B Side 235mmFeatures: Double-sided printing, genuine PEI powder coating,wear-restance and high strength
100% brand new and high quality
Easy to print and to maintain lower runing cost especially for printing farm
Easy to remove by bending and popping it off, can repeatedly use, practical.
Hardened steel spring sheet never diforming,high temperature resistant
Make adding inductive Z-probe possible
Specification: Material:Steel
Number of Items:1 x PEI Build Steel Plate+Magnetic Base
Size: approx 235x235mm/9.25x9.25in
Weight: 400g
Feature: PEI & Powder; Two-side Coated
Application: Ender 3 Printer
Size: Approx 235mmx235mm/9.25x9.25in
Maintenance:
Wipe the print surface before and after a print with isopropyl alcohol to maintain a clean surface for maximum bed adhesion strength. As with any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface. If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the print from the bed.
Package Includes: 1 x PEI Build Steel Plate+Magnetic Base
note: Do not use acetone on powder coated pei side.
As with any printing platform, make sure to print too close to the hot bed to avoid damaging the printing surface. If printing PETG, TPU, TPE and RYNO consumables, please make sure the hot bed is heated before taking the mold from the hot bed after printing!
Due to the problems of lighting effects and shooting angles, there will be certain tolerances in the product, please understand.
Please allow 0-2mm error due to manual measurment.