Tấm Pin Năng Lượng Mặt Trời 100w 18v + Điều Khiển 30 Pwm Cho Xe Hơi / Nhà Ở / Leo Núi / Cắm Trại 30a tại Lotte Market
Thương hiệu: | Xem thêm Cốc/Bộ sạc Thương hiệuMô tả ngắn về Tấm Pin Năng Lượng Mặt Trời 100w 18v + Điều Khiển 30 Pwm Cho Xe Hơi / Nhà Ở / Leo Núi / Cắm Trại 30a tại Lotte Market
Used to charge , MP3, pad, or other USB-charged device. Great for outdoor cycling, climbing, hiking, camping, traveling, etc. Fully 4-stage PWM charge management. Dual mosfet Reverse current protections, low heat productions. Solar Panel:. Voc: 20V. Ipmax: 2. Size: 660*280*2. Conversion rate: 19. Suitable for: Cycling, Climbing, Hiking, Camping, Traveling, etc. Buck charge: 28. USB output: 5V/3A. Discharge stop: 21.: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Tấm Pin Năng Lượng Mặt Trời 100w 18v + Điều Khiển 30 Pwm Cho Xe Hơi / Nhà Ở / Leo Núi / Cắm Trại 30a tại Lotte Market
Used to charge , MP3, pad, or other USB-charged device.You can place the panel in the sun and use it to directly charge your device.
Great for outdoor cycling, climbing, hiking, camping, traveling, etc.
Build-in industrial Micro-controller.
Fully 4-stage PWM charge management.
One-key setting,digital display, auto memory function.
Dual mosfet Reverse current protections, low heat productions.
Build-in short-circuit protections, open-circuit protections, reverse protections, over-load protections.
Solar Panel:
ISC: 3.33
Voc: 20V
Vpmax:18V
Power: 100W
Ipmax: 2.77A
Output: 5V/18V
Size: 660*280*2.5mm
Waterproof rate: IP65
Conversion rate: 19.6-20%
Material: Monocrystalline silicon cell
Suitable for: Cycling, Climbing, Hiking, Camping, Traveling, etc.
Controller:
el: PWM
Buck charge: 28.8V
Float charge: 27.4V
USB output: 5V/3A
Self-consume: less than 10mA
Discharge stop: 21.4V
Voltage: DC 12V/24V
Max solar input: less than 50V
Current: 10A/20A/30A
Rated working current: Less than or equal to 20A
Discharge reconnect: 25.2V
Working temperature: -35Celsius ~60Celsius
Output voltage: 12V/24V Automatically distinguish voltage
Safety Instructions:
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries).
4.The charge regulator is only suitable for regulating solar ules. Never connect another charging source to the charge regulator.
System Connection:
1.Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic ule to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
Colour: black
Material:monocrystalline silicon
Package Contents:
1 X Solar Panel
1 X Solar Controller
1 X DC Male Cable
1 X Crocodile Clip
1 X Car Charger