Tấm nhựa Polyetherimide PEI 350x350mm cho máy in 3D Voron 2.4 tại Lotte Market
Thương hiệu: | Xem thêm Máy In, Máy Scan & Máy Chiếu Thương hiệuMô tả ngắn về Tấm nhựa Polyetherimide PEI 350x350mm cho máy in 3D Voron 2.4 tại Lotte Market
PEI Sheet 350x350x0. 4 Voron2 V2. PEI (polyetherimide) sheets provide a 3D printed build surface, which does not require tapes, pastes or adhesives. The stable use temperature is 150 degrees. Applicable model: for Voron 2. Once the PEI board is connected to the backing, you can more easily fix it on the bottom plate. This will ensure that the PEI: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Tấm nhựa Polyetherimide PEI 350x350mm cho máy in 3D Voron 2.4 tại Lotte Market
PEI Sheet 350x350x0.3mm Self-Adhesive Polyetherimide Build Surface for Voron 2.4 Voron2 V2.4 3D Printer AccessoriesFeature:
PEI (polyetherimide) sheets provide a 3D printed build surface, which does not require tapes, pastes or adhesives. Both ABS and PLA adhere well to the surface, so there is no need to use a support raft to obtain better adhesion. The stable use temperature is 150 degrees.
Specification:
Product size: 350*350mm
Applicable model: for Voron 2.4
Instruction:
1. Please remove the backing before sticking it on the construction surface, and then remove the transparent protective film before use.
2. Once the PEI board is connected to the backing, you can more easily fix it on the bottom plate.
3. It helps to wipe the surface with isopropanol, methanol or soap between prints. This will ensure that the PEI is clean and aid in bonding.
4. Light sanding with 5000 sandpaper will also make the PEI board have a longer service life.
Note:
There may be slight size deviations due to manual measurement, different measuring methods and tools.
The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
Included:
1 X PEI Sheet