Tai nghe bluetooth không dây gắn mũ bảo hiểm kèm phụ kiện tại Lotte Market

Giới thiệu Tai nghe bluetooth không dây gắn mũ bảo hiểm kèm phụ kiện tại Lotte Market

-Latest bluetooth V4.2 chip, high fidelity stereo
-No need for manual operation, automatic call answering
-Built-in high sensitivity microphone with windproof sponge cover
-bluetooth headsets have a static placement time of up to 1200 days
Description:

Item type:bluetooth Headset

-bluetooth transmission rate is fast and stable, 10-40 meters transmission distance

-Ultra low power consumption, continuous playing music for 13 hours (100 volume playback)

-English voice prompts for power on, power off, pairing success, low battery, maximum volume, etc

-Can be used in most motorcycle helmets on the market, can be installed in DIY, simple and convenient

Specification:

Model: A93427

bluetooth Specification: V4.2+EDR/A2DP/AVRCP/HFP

Frequency Range: 2.4026GHz-2.480GHz

Transmission Distance:10-40m

Channel: Stereo

Speaker Parameters: 24 ohms / 30mm

Speaker Power: 30 mW*2

Signal to Noise Ratio: 110dB

Siri: Support

Lithium Battery: 3.7V/250mAh

Play Time: 13 hours (100 volume playback)

Talk Time: 18 hours or more

Standby Time: 700 hours or more

Charging Time: About 2.5 hour

Rest Time: 1200 days

Installation:

1. Remove the inner lining of the ear part of the helmet, tear off the release paper of the magic sticker surface, and stick the magic sticker on the ear part of the helmet, stick one on each side, and press it firmly to make it stick firmly.

2. Tear off the release paper of the crocheted magic sticker, put the magic sticker on the back of the earphone, stick one on each side, and press it firmly to make it stick firmly.

3. Attach the earphone with the microphone tube and the button to the magic sticker of the left ear of the helmet, and press it to make it stick firmly. Install the inner lining of the left ear back into the helmet, and position the microphone and USB charging head to ensure that the microphone is facing the mouth (if the adjustment is not in place, it may affect the call).

4. Pass the sub-headphone through the top of the helmet and buckle it on the rough surface of the helmet's right ear. Press it firmly to make it stick firmly. Then install the inner lining at the right ear.

5. The headset can be disassembled, the magic sticker fix is better, pay attention not to use too much force when disassembling, so as not to pull the magic stickeroff.

Tips:*Headphones need to be close to the ear to achieve the best sound.

*Different brands of helmets on the market have different lining depths at the ears. Buyers need to adjust the height of the headphones in the helmet so that the headphones are as close as possible to the ear for the best experience.

Package includes:

1 x bluetooth Headset

1 x User Manual

1 x USB Cable

3 x Microphone Sponge Cover

4 x Adhesive magic sticker

Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
#moto helmet#black headset#helmet bluetooth headset