Standard Type IEEE802.3AF/AT IP 48V To 12V Camera Active POE Splitter tại Lotte Market
Thương hiệu: | Xem thêm Camera giám sát Thương hiệuMô tả ngắn về Standard Type IEEE802.3AF/AT IP 48V To 12V Camera Active POE Splitter tại Lotte Market
Operation Temperatue:-20 ~ 45. Power Input: DC44~57V. Body size: 80 x 27x 22 mm. Data&Power INPUT Port: from RJ45 female. Power Output Port: 5. Storage Temperature:-30 ~ 70. Power Pin:support both 1/2(+),3/6(-) or 4/5(+),7/8(-). RJ45 Modular Plug cable length155mm. Yellow LED(power) will be light up when DC Port connects to the device. The splitter does not have the function to: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Standard Type IEEE802.3AF/AT IP 48V To 12V Camera Active POE Splitter tại Lotte Market
Operation Temperatue:-20 ~ 45
Compliant with IEEE802.3af
Power Input: DC44~57V
Data Output Port: RJ45 Male
Body size: 80 x 27x 22 mm
Isolation: 2.5kV
Data&Power INPUT Port: from RJ45 female
Devices will be detected before poe input
Power Output Port: 5.5x2.1mm DC Power Plug
Storage Temperature:-30 ~ 70
Data Transfer Rate: 10/100Mbps
Power Pin:support both 1/2(+),3/6(-) or 4/5(+),7/8(-)
DC cable length165mm
RJ45 Modular Plug cable length155mm
Power Output: DC12V 1A~2A(Rated 1.3A,max.2A)
Notice:
Yellow LED(power) will be light up when DC Port connects to the device.
Green LED(data) never light in any circumstances,two reasons are below,
1.The splitter does not have the function to monitor the data of the network cable.
2.due to the cost problem,the network interface component is from the universal components which own two LEDs on the market.