Set 5 Mô Đun Động Cơ Bước A4988 Chuyên Dụng Cho Máy In 3d tại Lotte Market
Thương hiệu: | Xem thêm Máy In 3D Thương hiệuMô tả ngắn về Set 5 Mô Đun Động Cơ Bước A4988 Chuyên Dụng Cho Máy In 3d tại Lotte Market
5PCS CNC 3D Printer Parts Accessory Reprap Pololu A4988 Stepper Motor Driver Module With Heatsink For Ramps 1. product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors,. A4988 includes a fixed off-time current regulator,. A4988 converter is the key to the easy implementation. There are no phase. A4988 interface. In the micro-step operation,: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Set 5 Mô Đun Động Cơ Bước A4988 Chuyên Dụng Cho Máy In 3d tại Lotte Market
5PCS CNC 3D Printer Parts Accessory Reprap Pololu A4988 Stepper Motor Driver Module With Heatsink For Ramps 1.4A4988 is a complete microstepping motor driver with built-in translator for easy operation. This
product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors,
output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator,
the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation.
As long as the ”step” input inputting one pulse drives the motor one microstep. There are no phase
sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface
is very suitable for complex microprocessor is unavailable or is overburdened.
In the micro-step operation, A4988 chopping control inside automatically selects the current decay
mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some
fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results
in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal
synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM)
operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis
, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing.
A4988 surface mount QFN package (ES), a size of 5 mm × 5 mm, nominal overall package height
of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T),
with 100% matte tin leadframe plating.
Features:
We have two colors of this item,if you want red version,please leave us the message after you palce the order,or we will send thedefault:green version.
Low RDS (On) Output
Automatic current decay mode detection / selection
Mix with slow current decay modes
Synchronous rectification for low power dissipation
Internal UVLO
Cross-current protection
3.3 and 5 V compatible logic supply
Thermal shutdown circuitry
Ground fault protection
Load short-circuit protection
Optional step five modes: full, 1/2, 1/4, 1/8 and 1/16
Package Include:
1×A4988 Stepper Motor Driver Module
1×Heatsink
#CNC #3D #Printer #Parts #Accessory #Reprap #Pololu #A4988 #Stepper #Motor #Driver #Module #With #Heatsink #For #Ramps1.4