Set 2 Bảng Mạch Chuyển Đổi Usb 3.0 20 Pin Sang Cổng Cắm L 90 Độ Chuyên Dụng Cho Bo Mạch Chủ Mẹ tại Lotte Market
Thương hiệu: | Xem thêm Mainboard - Bo Mạch Chủ Thương hiệuMô tả ngắn về Set 2 Bảng Mạch Chuyển Đổi Usb 3.0 20 Pin Sang Cổng Cắm L 90 Độ Chuyên Dụng Cho Bo Mạch Chủ Mẹ tại Lotte Market
[Solution]Providing a convenient solution for changing the installing direction of USB 3. By allowing the USB 3. [Compatibility]The adapter is standard USB 3. 0 20 pin/19 pin ports on the motherboard such as Gigabyte Msi Onda Inte DELL HP Lenovo USB3 Motherboard, etc. 0 20 pin/19 pin port to improve the connection between your motherboard and USB 3. Must install: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Set 2 Bảng Mạch Chuyển Đổi Usb 3.0 20 Pin Sang Cổng Cắm L 90 Độ Chuyên Dụng Cho Bo Mạch Chủ Mẹ tại Lotte Market
[Solution]Providing a convenient solution for changing the installing direction of USB 3.0 20 pin/19 pin cables with the 90-degree L-Turn DOWN Angled adapter.By allowing the USB 3.0 20 pin/19 pin cable to be installed at a 90 degree angle, builders are no longer need to wrap or fold the cable up and back over the motherboard and reduce the amount of cables needed in front of the motherboard tray.;[Compatibility]The adapter is standard USB 3.0 20 pin connector, so it will work with all of USB 3.0 20 pin/19 pin ports on the motherboard such as Gigabyte Msi Onda Inte DELL HP Lenovo USB3 Motherboard, etc.;
[Note]The adapter was only designed for USB 3.0 20 pin/19 pin port to improve the connection between your motherboard and USB 3.0 20 pin cable. Must install the adapter step by step to avoid shorting pins and motherboard damage. Please remove power cable and wait 10 seconds before installation.;
Material:PC+metal
colour:Black+Blue
Package Contents:
2 * USB 3.0 20 Pin Male to Female 90°DOWN Angled Adapter
/
2 * USB 3.0 20 Pin Male to Female 90°UP Angled Adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.