POWER Bảng Mạch Điều Khiển Sạc Pin Lithium Kỹ Thuật Số Xh-M602 3.7-120v tại Lotte Market

Giới thiệu POWER Bảng Mạch Điều Khiển Sạc Pin Lithium Kỹ Thuật Số Xh-M602 3.7-120v tại Lotte Market

Product name: CNC battery charging control module
Product model: XH-M602
Input voltage: AC 220V
Display accuracy: 0.1V
Control accuracy: 0.1V
Output type: output switch
Voltage error: ±0.1V
Scope of application: 3.7~120V all lithium battery storage batteries
Net weight: 111g
Product size: 86*58*24mm

Instructions
In the state of setting the voltage value, the start button acts as an up button, and the stop button acts as a down button

Set the starting voltage
In the normal display voltage state, press the start voltage button once to display the start charging voltage. Long press the start button, the number flashes, set the start charging voltage value through the start and stop buttons

Set stop voltage
In the normal display voltage state, press the stop voltage button once to display the stop charging voltage. Long press the stop button, the number flashes, set the stop charging voltage value through the start and stop buttons

reset
When the power is on, press and hold the start/stop button at the same time, the digital display is 888, and the factory settings are restored

prompt:
Attention dear! The default starting voltage of the product is 12V, and the stopping voltage is 14V. When setting the voltage, if it stops until a certain value is reached, the setting is no longer possible, you can set another voltage first, and then set this voltage.