Nhựa in 3D resin (dùng cho in trang sức) - Ifun 3122w Easy Casting High Accuracy UV 405nm 3D Printer Resin For LCD 3D tại Lotte Market
Thương hiệu: | Xem thêm Máy In 3D Thương hiệuMô tả ngắn về Nhựa in 3D resin (dùng cho in trang sức) - Ifun 3122w Easy Casting High Accuracy UV 405nm 3D Printer Resin For LCD 3D tại Lotte Market
Physical and chemical properties (before curing):. Density: 1. Physical and chemical properties (after curing):. Hardness(D): 80A-40D. Ignition temperature: 350℃. Breaking strength: 20-25MPa. The secondary curing time of casting resin is required to be long. Recommended thickness: 0. Machine type: Relative light intensity. L4K Pro: 1. ANYCUBIC (2k): 0. Bottom exposure: 60s. Top support diameter: 0. Support density: 50%. post-curing time: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Nhựa in 3D resin (dùng cho in trang sức) - Ifun 3122w Easy Casting High Accuracy UV 405nm 3D Printer Resin For LCD 3D tại Lotte Market
- Physical and chemical properties (before curing):Viscosity: 200-350cps(@25℃)
Density: 1.05±1.1g/cm³
Flash point: 90-130℃
- Physical and chemical properties (after curing):
Shrinkage: <1%
Hardness(D): 80A-40D
Tensile Strength: 15-25MPa
Ignition temperature: 350℃
Modulus of elasticity: 300-350MPa
Breaking strength: 20-25MPa
Elongation: 30-50%
The secondary curing time of casting resin is required to be long.
The secondary curing time affects whether the resin can burn out, because it is adjusted according to the actual effect.
- Recommended thickness: 0.05mm
- Light source wavelength: 405nm
- Machine type: Relative light intensity
DLP: 5
L4K Pro: 1
CREALITY: 0.6
ANYCUBIC (2k): 0.4
- LCD(4K Mono)
Bottom exposure: 60s
Normal layer exposure: 6
Top support diameter: 0.6~0.8mm
Support diameter: 0.8~1.2mm
Support density: 50%
Support angle: 45%
post-curing time (30W power): 30 min
Nếu quý khách có yêu cầu tư vấn thêm xin liên hệ Zalo: 0934646301 / 0348818447