Nhiệt kế kỹ thuật số XH-W3002 12V/110-220V cho gia cầm tại Lotte Market

Giới thiệu Nhiệt kế kỹ thuật số XH-W3002 12V/110-220V cho gia cầm tại Lotte Market

Product Description:
Microcomputer intelligent digital temperature controller.
With led display to show the results clearly.
Wide temperature measuring range from -50℃ to 110℃ and temperature control range from -50℃ to 110℃, high accuracy.
Support delay start function and temperature correction function.
Made of fine quality material with strong durability, long service life.
Equipped with 1M water-resistant sensor for more convenient use.
Easy setting, easy to install and use.
Widely applied to incubation, hatching area, equipment case, air conditioning system, temperature control protection, cabinet cooling system and other fields.

Specifications:
Model: XH-W3002 Temperature Controller
Material: ABS
Color: White
Power supply: 12V, 110~220V (Optional)
Load Power:
* 12V: 120W
* 110V~220V: 1500W
Temperature Control Range: -50℃~110℃
Temperature Control Accuracy: ±0.1℃
Measuring Input: NTC10K Water-resistant Probe L=100cm
Output Type: Direct Output
Output Capacity: 10A(Max)
Item Size: Approx. 60 x 45 x 31mm / 2.36 x 1.77 x 1.22in

Heating/refrigeration modes:
users can set the start/stop temperature freely;With large and clear LED display for better readability
Easy to use:
Three buttons for easy operation, to set start temperature, stop temperature, corrected temperature, delay start time.
Two Work Mode:
Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature)
Applycation:
Waterproof sensor, can be used to detect water or other liquid non-corrosive. objects temperature, for aquaculture,ornamental fish and other
Operation Instructions:
Set the start temperature; press the up button on one time to show the starting temperature, press the upper key for about 3 seconds, start temperature and digital flicker, and set the required temperature value through the upper and lower keys.
Set the stop temperature: press the next button to show the stop temperature, press the key for about 3 seconds, stop the temperature, and digitally flicker, and check the required temperature value through the upper and lower keys.
Restore factory setting:
under the condition of electricity, at the same time hold down the upper and lower keys, the digital tube display 888 then automatically jump to the detection temperature, can restore the factory setting;
Start temperature < stop temperature = heating mode
Start temperature > stop temperature = refrigeration mode
Prompt:
When setting up the heating mode, if the temperature value is set upside down, the output indicator will not be lighted and the load will not work. If the above situation occurs after the completion of the setup, we can check whether the temperature value of the set is reversed.

Package includes:
1 Pc x Temperature Controller with Sensor Probe

Note:
Please allow 1-2mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.