Mô đun tốc độ cao CJMCU FT232H USB sang JTAG UART/ FIFO SPI/ I2C tại Lotte Market
Thương hiệu: | Xem thêm Bộ Lưu Điện Thương hiệuMô tả ngắn về Mô đun tốc độ cao CJMCU FT232H USB sang JTAG UART/ FIFO SPI/ I2C tại Lotte Market
#CJMCU #FT232H #Multifunction #High-Speed #USB #to #JTAG #UART/ #FIFO #SPI/ #I2C #Module. CJMCU-FT232H is a single channel USB 2. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. Single channel USB to serial / parallel ports with a variety of configurations. No USB specific firmware programming required. 0 Hi-Speed (480Mbits/Second) and Full: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Mô đun tốc độ cao CJMCU FT232H USB sang JTAG UART/ FIFO SPI/ I2C tại Lotte Market
#CJMCU #FT232H #Multifunction #High-Speed #USB #to #JTAG #UART/ #FIFO #SPI/ #I2C #Module
CJMCU FT232H Multifunction High-Speed USB to JTAG UART/ FIFO SPI/ I2C Module
CJMCU-FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces.
The FT232H has the following advanced features:
1. Single channel USB to serial / parallel ports with a variety of configurations.
2. Entire USB protocol handled on the chip. No USB specific firmware programming required.
3. USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
4. Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design.
5. UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
6. USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec.
7. USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec
8. Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).
9. CPU-style FIFO interface mode simplifies CPU interface design.
10. Fast serial interface option.
11. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
12. Adjustable receive buffer timeout.
Typical Applications:
Single chip USB to UART (RS232, RS422 or RS485)
USB to FIFO
USB to FT1248
USB to JTAG
USB to SPI
USB to I2C
USB to Bit-Bang
USB to Fast Serial Interface
USB to CPU target interface (as memory)
Size:5.6x2.8cm/2.20x1.10inch
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Includes:
1x FT232H high-speed multi-function module