Mô đun thu phát không dây NRF24L01+ 2.4GHz NRF24L01+2.4G cho Arduino tại Lotte Market
Thương hiệu: | Xem thêm Bộ Thu Wifi Thương hiệuMô tả ngắn về Mô đun thu phát không dây NRF24L01+ 2.4GHz NRF24L01+2.4G cho Arduino tại Lotte Market
NRF24L01+ Wireless Module 2. You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system!. MultiCeiver hardware and six receiver functions. /- 60 ppm crystal. There is no need multi-layer PCB. Improved ShockBurst and the serial interface can be easy to connect with a variety of low-cost MCU. Received in the rate of 2Mbit/s, the peak current is 12. Power-down mode,: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Mô đun thu phát không dây NRF24L01+ 2.4GHz NRF24L01+2.4G cho Arduino tại Lotte Market
NRF24L01+ Wireless Module 2.4G
This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! This module can achieve a good balance between wireless transition performance and cost!
You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system!
2Mbit/s, 1Mbit/s, 250Kbit/s, three selectable transmission rate.
MultiCeiver hardware and six receiver functions.
2 Mbit/s make high-quality VoIP is possible.
+/- 60 ppm crystal.
Only require an external inductor in the antenna matching
There is no need multi-layer PCB.
5V tolerance level inputs.
Improved ShockBurst and the serial interface can be easy to connect with a variety of low-cost MCU.
There si no need SPI interface with the MCU.
Received in the rate of 2Mbit/s, the peak current is 12.5mA.
When the rate of 2Mbit/s @ 0dBm output,the peak current is 11mA.
Power-down mode, power consumption is 400nA.
Standby mode, power consumption is 32uA.
130us fast switching and wake time.
With voltage regulator:Oltage regulators on board.
Built-in 2.4GHz antenna,support up to six channels of data reception.
Low operating voltage: 1.9-3.6V