Mô đun tăng áp mini DC-DC 0.9-5V sang DC 5V cho Arduino tại Lotte Market

Giới thiệu Mô đun tăng áp mini DC-DC 0.9-5V sang DC 5V cho Arduino tại Lotte Market

#Mini #DC-DC #0.9-5V #to #DC #5V #Step-up #Boost #Voltage #Converter #Module #For #Arduino
Mini DC-DC 0.9-5V to DC 5V Step-up Boost Voltage Converter Module For Arduino
Description:
Input voltage 0.9 ~ 5V, output 5V
Maximum output current: 500 MA,

Start Voltage 0.9V, Output Current 10MA
INPUT 1-1.5V, OUTPUT 5V 50-110MA;
INPUT 1.5-2V, OUTPUT 5V 110-160MA;

INPUT 2-3V, OUTPUT 5V 160-400MA;
INPUT above 3V, OUTPUT 5V 400-500MA;

DC-DC Boost module working frequency 150KHZ. efficiency is normal 85% .
2.54mm pin pitch, Arduiuo Breadboard friendly.
Operating ambient temperature : -25~+85 Degrees Celsius

Applications:

Battery powered equipment
Wireless Module,NRF24L01 CC1101 CC2500 etc.
Development Board,FPGA/CPLD STM32
Ardiuno_uno mega2560 Breadboard Raspberry Pi
5V LED Lighting
5V Low-power motor drive
Wireless communication equipment
banana pi

Audio equipment

Attention:
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself


Size: 1.1x1.1cm/0.43x0.43inch
Quantity: 1 Pc
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package Contents:
1 Pc x Voltage Converter Module