Mô Đun Tăng Áp Dc 3.6v-6v Sang 400kv 400000v Chất Lượng Cao tại Lotte Market

Giới thiệu Mô Đun Tăng Áp Dc 3.6v-6v Sang 400kv 400000v Chất Lượng Cao tại Lotte Market

Description
The high-voltage module uses the principle Tesla coil is made of high-voltage pulse output voltage current, small size , high efficiency, simple external circuit ( just plug in the switch , the battery can be ).
3.7V Li-ion battery can be used 1 or 2 section , such as 18650 , idle cell phone batteries ( to remove the for protection board , Recommended capacity of 2000mAh or more ) or NiCd / NiMH battery pack , 4V or 6V Lead Acid batteries.
To avoid high-pressure high-voltage module load electricity use.
Must adjust the high voltage side suitable distance(before electricity, battery voltage and capacity is proportional to the distance from high-voltage arcing used when testing the arc distance from short to long experiment, prohibited from beyond the arc when powered up, the energy can not be released due to high pressure , easily damage the module.)
Two sections of small capacity lithium series of 7.2V, measured arc voltage has dropped to about 4V state , the capacity of the smaller voltage pulled lower.

Specification:
Voltage: Input DC3.6-6V, output DC400kV - 600KV( Please pay attention to safety when used ).
High Type : Pulse Current.
High voltage bipolar discharge distance : 10mm-20mm.
Output voltage lines Length: about 100mm.
Input power cable length: about 10mm ( red is positive ).
Dimensions: 24 * 63mm.

Note:
There might be a bit color distortions due to different computer resolutions.
There might be size errors due to different computer resolutions.

Package include:
1 * High-voltage generator module.