Mô Đun Tăng Áp 600w Dc-Dc 10-60v Đến 12-80v 48v 72v Chuyên Dụng tại Lotte Market

Giới thiệu Mô Đun Tăng Áp 600w Dc-Dc 10-60v Đến 12-80v 48v 72v Chuyên Dụng tại Lotte Market

600W high power booster module, wide voltage input: 12V~60V, adjustable 12V~80V, wide voltage output; adjustable output current: ultra-low input and output dropout voltage.

specification:
Input voltage: 12V -60V
Input current: maximum input current 15A
Ke Mi Technology Co., Ltd.
Output voltage: 12V-80V continuously adjustable
Output current: maximum output current 10A (adjustable)
Output power: effective power P = input voltage V* 10A
Conversion efficiency: up to 95% (input voltage and current; output voltage and current affect conversion efficiency)
Short circuit protection: fuse
Module size: 73*51mm
Weight: 265g

detailed description:
1. The product is made of solid materials, using a custom radiator, specifications: radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate , It is convenient for users to use directly, just use long screws to fix directly.
2. Inductor magnetic ring adopts 27mm iron silicon aluminum magnetic ring, 1mm double wire wound inductor, high quality filter capacitor, input one 1000uF63V electrolytic capacitor, output two 470uF 100V electrolytic capacitors, boost output power quality is better, onboard Power switch, power indicator light, with voltage adjustment, current adjustment potentiometer, make the output more convenient, you can adjust the output voltage, current size at any time, input and output using 8500 terminals, strong current capacity, to ensure long-term reliable work.

Application range:
1. DIY a vehicle power supply with adjustable output, only need to connect 12V power supply to the input, the output voltage can be adjusted continuously (14V-80V), but the output voltage cannot be lower than the input voltage.
2. Universal car laptop power supply. The input is connected to a 12V power supply, and the output is adjusted to the voltage required by the notebook to work.
3. Booster charger, you can use the 12V power supply to charge the battery higher than 12V, such as 24V battery, and the charging current can be adjusted.
4. Power supply for electronic equipment, as long as the voltage is adjusted to the required voltage and the current does not exceed the rated current, it can work normally.
5. System pre-level power supply, when doing a certain project, the input is 10V-18V, the system board needs about 24V power supply and the power is very large, the power of the ordinary DC-DC module is too small, this module does not need to be debugged directly. Can work, easily achieve high efficiency and high power boost.