Mô đun tăng áp 180W DC-DC chuyên dụng tại Lotte Market

Giới thiệu Mô đun tăng áp 180W DC-DC chuyên dụng tại Lotte Market

#180W #DC-DC #Adjustable #Boost #Converter #CC/CV #Constant #Current #Step #Up #Power #Module
180W DC-DC Adjustable Boost Converter CC/CV Constant Current Step Up Power Module
100% brand new and high quality
Features:
Adopting TCB of high thermal conductivity, it is convenient to place heatsink externally.
Super wide range of voltage, it allows boosting, voltage reduction and voltage stablization.

Output voltage is adjustable on the occasion of realizing 0 pressure difference of input and output..

Module Parameters:
Module Nature: Non-isolated voltage stablization.
Input Voltage: DC 10.5-70V(Please underclocking when the supply voltage is lower than 12V.)

Input Current: Max.10A, Max.8A For Long Time
Output Voltage: DC 5-58V(Automatically adjust to application of that input voltage lower/higher than setting output voltage)
Output Current: Max.8A, Max.6A For Long Time(Both input and output current must not work at maximum value, the sum of input and output voltage cannot reach out 12A.)
Adjustable Constant Current: 0.5-8A
Output Power: Max.180W(Maximum current is 8A When operate at low voltage, and maximum output power is 30W when there is no supplement heat rejecter on the board. Besides, heatsink must be strengthened when the module temperature exceeds 60℃。)

Standby Current: Approx.20mA
Transfer Efficiency: Approx.90%
Input Connection Reversely Protection: Not Supported, Please check positive and negative anodes before powering on.

Output/Current Control Method:

1. Adjust potentiometer: reduce voltage in clockwise direction, increase voltage in anticlockwise direction. Set the output voltage value you needed in accordance with your load requirments. For example, 10 LEDs can be adjusted to 37V voltage.
2. You can adjust potentiometer in the clockwise with approximately 20 turns, so as to set the minimum output current and adjust the current value you required with LED connection. If this product is used for battery charging, please make sure the battery is fully discharged before connecting with output and setting required current. Please do no adjust current in shortcut method.(Fully discharged battery can make value setting more accurate, for charge current is smaller when the remaining capacity of battery is larger.

Specification:
Type: Boost Converter

Size: 70 x 52 x 21mm(2.76 x 2.05 x 0.83in)
Quantity: 1 Pc

Note:
1. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.

2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Boost Converter