Mô đun sưởi ấm cho máy in 3D tại Lotte Market

Giới thiệu Mô đun sưởi ấm cho máy in 3D tại Lotte Market

#3D #Printer #Heatbed #Power #Module # #Power #Expansion #Board # #Work #with #Ender #Anycubic
3D Printer Heatbed Power Module Power Expansion Board Work with Ender Anycubic
Features: The hot bed power expansion module, which can be connected with high power hot bed, withstanding larger power, convenient for machine use while reducing the danger caused by serious heating.
High-quality components, source manufacturers, products are guaranteed.
As long as the mainboard [hot bed] port with voltage, it can drive the power supply to heat up the hot bed. The driving power is low (high sensitivity) and the mainboard does not need to output current.
Supply power for large-size and high-power heating beds to avoid circuit breakdown or damage due to long-term output of large currents.
Large size radiator to avoid excessively high temperature of the MOS module.

Specification: Name: Hot Bed Power Expansion Board
Material: PCB- Board+Aluminum+ABS
Weight: 90g/0.19lb
Size:50X60X33cm/19.68X23.62X12.99in

Package Includes: 1X MOS Module
1X Signal Line
1X 50cm/19.68 Power Cord

note: Due to the problems of lighting effects and shooting angles, there will be certain tolerances in the product, please understand.
Please allow 0-2mm error due to manual measurment.
When you connect power supply cable, you need to pay attention to distinguish the positive and
negative polarity of the power supply,and do not reverse the connection of the cable to avoid burning
the module and causing unnecessary losses.
Module placement problem: when you use the module, do not put it in a place where the wires are dense. In this way, it helps to reduce the heating burden on the module and increase the safety.
When the module is working: don't let the conductor to touch its bottom,
it can prevent short circuit and burn out.