Mô đun rơ le Xiyijia DC 32 chức năng 7‐30V chuyên dụng cho máy bơm nước tại Lotte Market

Giới thiệu Mô đun rơ le Xiyijia DC 32 chức năng 7‐30V chuyên dụng cho máy bơm nước tại Lotte Market

----------------------- -Product Information - --------------------------

Ready to send High quality Best price Brand new 100%
Lowest Price Shopee Logo upplier Info invoice
Surprises for you:
Follow shop/ “Like” Items: Priority Shipping & Free Gift
PS: If you want a free gift, please send me the screen that you follow my shop and leave a message on your order.#xiyijiaproduct


Feature:
1. Various functions, 32 common functions, pulse triggering, power failure, cycle timing, etc., to meet more application needs.
2. The relay is equivalent to a passive contact switch, which controls the on and off of a wire, which is simple and convenient to use.
3. High compatibility, wide voltage working mode, 7v‑30v universal voltage, and support DC.
4. The output power can be controlled within 5A DC or AC load, adjustable at any time from 0.01 second to 999 minutes.
5. Wide range of applications, can be used to control solenoid valves, water pumps, motors, light strips, etc.

Specification:
Item Type: Relay Module
Product Model: YF-7
Input Voltage: DC 7~30V Optional
Output Power: Control DC or AC Load within 5A
Time Range: 0.01 Second to 999 Minutes, Any Time Adjustable
Wiring Port Description:
+: Input Power Positive
-: Input Power Negative
In+: Positive Signal Input Terminal
In-: Negative Signal Input Terminal
NO: The Relay Normally Open Interface, the Relay is Suspended Before It is Closed, and It is Short-Connected to COM After It is Closed.
COM: Relay Common Interface
NC: Normally Closed Interface of the Relay, Short-Circuit with COM Before the Relay is Closed, and Hang in the Air After Being Closed
P-23: When the signal disappears for more than A second, the relay pulls in, the signal disappears, and the relay stops
P-24: There is a signal. After A second, the relay is closed. After the signal disappears for more than A second, the relay stops.
P-25: There is a signal. After A second, the relay is closed. When there is another signal for more than A second, the relay stops.
P-26: When there is a signal, the relay will stop after closing for A second, and when the signal disappears, the relay will stop after closing again for A second.
P-27: If there is a pulse signal, the relay stops; if there is no pulse signal, the relay will be closed for A second; (the signal continues or the signal disappears will be regarded as no pulse signal)
P-28: After power-on, after a delay of A seconds, the relay will be closed until the power is off
P-31: After power on, the relay is closed for A second, disconnected for B second, infinite loop; power off stops
P-32: When there is a signal, start P-31 infinite loop; when the signal disappears, terminate the loop
P-33: Give a signal to start P-31 infinite loop; give another signal to terminate the loop
P-34: After power-on, the relay will be closed after a delay of A seconds, and stop after being closed for B seconds
P-35: There is a signal, after a delay of A second,