Mô-đun màn hình hiển thị OLED I2C SSD1306 0.96 inch cho Raspberry Pi tại Lotte Market

Giới thiệu Mô-đun màn hình hiển thị OLED I2C SSD1306 0.96 inch cho Raspberry Pi tại Lotte Market

#for #Raspberry #Pi #0.96in #OLED #I2C #Display #Module #IIC #Serial #Screen #Module #SSD1306
for Raspberry Pi 0.96in OLED I2C Display Module IIC Serial Screen Module SSD1306
Features: 100% brand new and high quality
High resolution: 128x64 (same resolution as 12864, high PPI).
Viewing angle: greater than 160°.
Power consumption: normal display 0.06w (far lower than TFT display).
Wide voltage power supply (3V~5V), compatible with 3.3V and 5V level logic, without level conversion chip.
IIC interface only needs 2 IO to light up easily.
Working temperature range is industrial grade (-20℃~70℃).
Military-grade process standards, long-term stable work.
It can be used for the Raspberry Pi 2B\3B\3B+\4B full range of development boards, for Arduino, C51, STM32 and other platforms. The Raspberry Pi provides programs that can display CPU, temperature, memory, hard disk occupation, IP address and other information.
The OLED screen pin header has been soldered, and the finished line is optional, which can be directly connected to the Raspberry Pi.

Specification: Size: 0.96(nch)
Type: OLED
OLED driver chip: SSD1306
Resolution: 128x64 (Pixel )
Module interface: IIC, ①VCC, ②-GND,③-SCL,④-SDA
Effective display area: approx. 21.744x10.864mm/0.86x0.43in
Module size: approx. 27.3x27.8 mm/1.07x1.09in
Viewing angle: >160°
Working temperature: 20°C~60°C
Storage temperature: 30°~70°C
Working voltage: 3.3V/5V

Package Includes: 1 x 0.96 inch OLED display

note: Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!