Mô Đun Lập Trình Ad9833 Dds Module Gy-9833 tại Lotte Market

Giới thiệu Mô Đun Lập Trình Ad9833 Dds Module Gy-9833 tại Lotte Market

General instructions:
The AD9833 is a low power, programmable, sinusoidal waveform generator with triangular and square wave outputs. Generation is required in various types of waveform detection, implementation, and time domain reflectometry (TDR) applications. The output frequency and phase are programmable software that can be easily adjusted. No external components are necessary. The frequency register is 28 bits wide: the clock frequency is 25 MHz, which can achieve 0.1Hz resolution; the AD9833 clock frequency is 1 MHz, which can be tuned to a resolution of 0.004Hz
The AD9833 has a standard serial interface that allows the device to be directly connected to different microprocessors. The device uses an external serial clock to write data or information to the control device
The AD9833WBRMZ-REEL model can be controlled to meet the quality and reliability requirements of automotive applications. Please note that this model's car specifications may differ from commercial models; therefore, designers must carefully read specific sections of this data sheet. Only automotive grade indicator products are available for automotive applications. Please contact your local ADI representative account for ordering information for specific products and obtain specific vehicle reliability reports for these models.
The AD9833 is written through the serial interface line. The serial interface operates at clock frequencies up to 40 MHz and is standard compatible with DSP and microcontrollers. The device operates from a 2.3 V 5.5 V supply
The AD9833 has a power-down function (SLEEP). This turns off unused parts of the device, minimizing power consumption, for example, turning off the DAC when generating the output clock

Features:
Digitally programmable frequency and phase
12.65 mW 3 V power consumption
0 MHz to 12.5 MHz output frequency range
Bit resolution: 0.1Hz to 25 MHz reference clock
Sine, triangular and square wave outputs
2.3 V to 5.5 V power supply
No external components required
SPI interface line
Extended temperature range: 40°C to + 105°C
Power off option
Update frequency: 25 (maximum)
VOUT maximum: 0.65 V.
Minimum VOUT: 38mV
VOUT temperature coefficient: 200°
High voltage input: 1.7-2.8 V.
Low voltage input: 0.5-0.7 V.
Input current: 10µ one
Entry capacity: 3pF
Operating temperature is 40 ° C to + 105 ° C; typical size is 25 ° C
Size: 17 * 12mm / 0.66 * 0.47”

Package:
1 signal generator module