Notice: file_put_contents(): write of 3601 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 3601 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
Mô Đun Hạ Áp Tự Động 7a / 80w - Lotte Market

Mô Đun Hạ Áp Tự Động 7a / 80w tại Lotte Market

Thương hiệu: | Xem thêm Mạch & Bộ phận điện Thương hiệu  

Mô tả ngắn về Mô Đun Hạ Áp Tự Động 7a / 80w tại Lotte Market

#DC-DC #Automatic #Step #Up #and #Down #Regulator #Module #Stabilizer #7A/80W #Power #Module. Input voltage:DC 4. Output voltage:DC 0. Maximum output current: 7A. Conversion efficiency:91% (measured at 12V input,19V output 2A). Key Function Details:. 5 seconds),to switch the display input and output voltage,when the indicator is red when the input is the voltage,when the indicator is green,the output voltage The Press
: Còn hàng
: Shopee
199.501đ 199.501đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Mô Đun Hạ Áp Tự Động 7a / 80w tại Lotte Market

#DC-DC #Automatic #Step #Up #and #Down #Regulator #Module #Stabilizer #7A/80W #Power #Module Mô Đun Hạ Áp Tự Động 7a / 80w
DC-DC Automatic Step Up and Down Regulator Module Stabilizer 7A/80W Power Module
Input voltage:DC 4.5 ~ 30V Do not reverse or reverse,or will be damaged
Output voltage:DC 0.5 ~ 33V
Maximum output current: 7AMô Đun Hạ Áp Tự Động 7a / 80w
Maximum output power:80W long continuous work Please strengthen the heat,it is best to leave a margin
Conversion efficiency:91% (measured at 12V input,19V output 2A)
Note:This module is a regulator module,without constant current function,can not output directly to the battery or LED (that is,the output can not directly connected to the battery,such as with the battery itself with a charging circuit can be connected,such as red charge Po,LED Drive there is no problem)
Key Function Details:Mô Đun Hạ Áp Tự Động 7a / 80w
Fast press and let go (press the duration of less than 0.5 seconds),to switch the display input and output voltage,when the indicator is red when the input is the voltage,when the indicator is green,the output voltage The Press this button for about 1 second~2 seconds,let go after the closure of the monitor,and then press the button again to re-open the display.
Press this button for more than 2 seconds,let go after the voltage display reference voltage reference,then the default display 3.33 and red light flashing,on behalf of the input is more accurate,short press the button to change the value,The range of values ​​is 3.28 to 3.38.Press the button to change the value,adjust to the appropriate value after a long press the button for more than 1 second,save the set of benchmarks,and then press the button to change the value,Reference voltage and return to normal display.(Hint:When the displayed voltage is lower than the actual voltage when the large reference voltage,when the display voltage is higher than the actual voltage to adjust the small reference voltage)
Reminder:the power module is sure to work,this module naturally cooling power of about 60W,such as a long time to work 80W,need to do appropriate to strengthen the heat,otherwise it will overheat protection.In the case of large current,there may be an inductive sound,which is normal.
Size:7.8x4.7cm/3.07x1.85inchMô Đun Hạ Áp Tự Động 7a / 80w
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item.Thank you!

Package Includes:
1x Step Up and Down Regulator Module

Chi Tiết Mô Đun Hạ Áp Tự Động 7a / 80w