Mô đun FT232H tốc độ cao USB sang JTAG UART/ FIFO SPI/ I2C CJMCU tại Lotte Market

Thương hiệu: | Xem thêm Thiết bị định vị GPS Thương hiệu  

Mô tả ngắn về Mô đun FT232H tốc độ cao USB sang JTAG UART/ FIFO SPI/ I2C CJMCU tại Lotte Market

#FT232H #Multifunction #High-Speed #USB #to #JTAG #UART/ #FIFO #SPI/ #I2C #CJMCU #Module. Single chip USB to UART (RS232, RS422 or RS485). USB to FT1248. USB to SPI. USB to Bit-Bang. USB to CPU target interface (as memory). 0 Hi-Speed (480Mb/s) to UART/FIFO IC. The FT232H has the following advanced features:. Entire USB protocol handled on the chip. USB 2. Multi-Protocol
: Còn hàng
: Shopee
149.788đ 199.717đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Mô đun FT232H tốc độ cao USB sang JTAG UART/ FIFO SPI/ I2C CJMCU tại Lotte Market

#FT232H #Multifunction #High-Speed #USB #to #JTAG #UART/ #FIFO #SPI/ #I2C #CJMCU #Module Mô đun FT232H tốc độ cao USB sang JTAG UART/ FIFO SPI/ I2C CJMCU
FT232H Multifunction High-Speed USB to JTAG UART/ FIFO SPI/ I2C CJMCU Module
Single chip USB to UART (RS232, RS422 or RS485)
USB to FIFO
USB to FT1248
USB to JTAG
USB to SPI
USB to I2C
Mô đun FT232H tốc độ cao USB sang JTAG UART/ FIFO SPI/ I2C CJMCU
USB to Bit-Bang
USB to Fast Serial Interface
USB to CPU target interface (as memory)
CJMCU-FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The FT232H has the following advanced features:
Single channel USB to serial / parallel ports with a variety of configurations.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
Mô đun FT232H tốc độ cao USB sang JTAG UART/ FIFO SPI/ I2C CJMCU
Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design.
UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec.
USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec
Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).
CPU-style FIFO interface mode simplifies CPU interface design.
Fast serial interface option.
Mô đun FT232H tốc độ cao USB sang JTAG UART/ FIFO SPI/ I2C CJMCU
FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
Adjustable receive buffer timeout.
Size: 3.7*1.6cm/1.46x0.63inch
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Mô đun FT232H tốc độ cao USB sang JTAG UART/ FIFO SPI/ I2C CJMCU
Package Includes:
1 x Module

Chi Tiết Mô đun FT232H tốc độ cao USB sang JTAG UART/ FIFO SPI/ I2C CJMCU