Mô đun đồng hồ điện tử ba trong một có bảng mạch đo nhiệt độ tại Lotte Market
Thương hiệu: | Xem thêm Trang trí tường Thương hiệuMô tả ngắn về Mô đun đồng hồ điện tử ba trong một có bảng mạch đo nhiệt độ tại Lotte Market
The multi-functional electronic clock module integrates time, internal and external temperature, and voltage. The time chip uses Epson's RX8025T chip, which is a temperature-compensated clock chip with accurate time. 3 m + 1. With brightness adjustment function, 3 levels of brightness can be adjusted. Module parameters:. Frame size: 22*58 mm. 5*56 mm. Voltage display range: 5. Up button:. (Note: The: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Mô đun đồng hồ điện tử ba trong một có bảng mạch đo nhiệt độ tại Lotte Market
Introduction:
The multi-functional electronic clock module integrates time, internal and external temperature, and voltage. A certain item can be displayed individually, or each item can be displayed alternately, and supports customizing the items to be displayed. The time chip uses Epson's RX8025T chip, which is a temperature-compensated clock chip with accurate time. The module comes standard with two waterproof probes of 0.3 m + 1.5 m, and the temperature measurement range is -35~120 degrees. With brightness adjustment function, 3 levels of brightness can be adjusted. And there is an automatic brightness function, which can be darkened at night and brightened during the day.
Module parameters:
1. Working voltage: DC 5.0~28V
2. Frame size: 22*58 mm
3. Installation opening size: 19.5*56 mm
4. Temperature display range: -35 ~ 120 ℃ (error ±1 degree)
5. Voltage display range: 5.0~28 V (error ±0.1V)
Up button:
In the normal display state, pressing this key will switch between the 6 display states of 【Time】→【Date】→【Temperature 1】→【Temperature 2】→【Voltage】→【Alternate Cycle Display】. (Note: The display items and switching interval time in the alternate cycle display state can be customized by the ”dd” and ”dF” parameters respectively)
Down button:
In the normal display state, press this key to enter the time\date\year\parameter setting. Press the setting button, ”minute” starts to flash, press the plus and minus keys to adjust the value. After adjustment, press the setting button, ”Hour” starts to flash, press the plus and minus buttons to adjust the value. Then press the set button to enter the adjustment of the date [note that the colon in the middle is not bright at this time, and the ”day” starts to flash. After adjusting, press the set button and the ”month” starts to flash, and then press the set button to start flashing. After adjusting, press the setting key to enter the extended parameter setting, see the following ”code meaning and function table” for details
More details can feel free to contact us, Thanks ^^