Mô đun điều khiển động cơ kép IRF3205 MOSFET 3-36V 10A Peak 30A DC tại Lotte Market
Thương hiệu: | Xem thêm Thiết bị đeo thông minh Thương hiệuMô tả ngắn về Mô đun điều khiển động cơ kép IRF3205 MOSFET 3-36V 10A Peak 30A DC tại Lotte Market
#Dual #Motor #Driver #Module #Board #Large #Power #H-bridge #IRF3205 #MOSFET #3-36V #10A #Peak #30A #DC. 100% brand new and high quality. Can withstand high current overload, the maximum current up to 30A. The drive uses the full two half-bridge driver chip + low resistance N-channel MOSFET components. Improve power utilization. This drive is superior integrated low power chip solution and: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Mô đun điều khiển động cơ kép IRF3205 MOSFET 3-36V 10A Peak 30A DC tại Lotte Market
#Dual #Motor #Driver #Module #Board #Large #Power #H-bridge #IRF3205 #MOSFET #3-36V #10A #Peak #30A #DC
Dual Motor Driver Module Board Large Power H-bridge IRF3205 MOSFET 3-36V 10A Peak 30A DC Motor Driver Board with Brake Function
Description:
100% brand new and high quality
Features:
The drive performance of these non-L298 motor driver chip can be compared, focus on current and efficiency, effectively motor power and battery life.
Can withstand high current overload, the maximum current up to 30A.
This drive also has a brake function can be quickly stopped the motor, brake quickly, braking obvious, easy to implement this feature.
The drive uses the full two half-bridge driver chip + low resistance N-channel MOSFET components.
Completer two half-bridge driver chip reliable drive mode, the MOSFET switching losses to a minimum. Improve power utilization.
MOSFET driver chip comes with hardware brake function and power feedback.
This drive is superior integrated low power chip solution and the other half-bridge power margin in the coordinated combination of programs and complex issues and complementary drive problems.
N-channel MOSFET IRF3205 MOSFET, use two dedicated half-bridge driver chip on the top tube using the boostrap capacitor, so that the tube has enough drive voltage of the MOSFET channel can be opened quickly, improve motor acceleration curvature, but also quickly for the motor brake. This allows the trolley can quickly start can quickly kill the car.
The driver can operate at 0-99% of the duty cycle of the PWM modulation, the motor driving voltage can be obtained sufficiently.
Specifications:
Motor reversal: DIR = 0 PWM = PWM
Parking brake: DIR = X PWM = 0 (X is an arbitrary state)
Motor forward: DIR = 1 PWM = PWM
POWER connected to the positive power supply, GND power supply is negative. Two motors were connected MOTOR1, MOTOR2
Motor and power connections
Rated Voltage: 3-36V
Rated Current: 10A
Peak Current: 30A
Use: for Freescale smart car contest Undergraduate Electronic Design Contest variety of DC motor control circuit
Dimensions(LxW): Approx. 108x58 mm/4.25x2.28 inch
Package Includes:
1 Piece Dual Motor Driver Module Board