Mô Đun Điều Khiển Đèn Led Thông Minh Esp8266 Esp-01 Esp-01S Rgb Cho Ide Ws2812 tại Lotte Market

Giới thiệu Mô Đun Điều Khiển Đèn Led Thông Minh Esp8266 Esp-01 Esp-01S Rgb Cho Ide Ws2812 tại Lotte Market

ESP8266 ESP-01 ESP-01S RGB LED Controller Module for IDE WS2812 Light Ring Smart Electronic DIY

characteristic:
Master: ESP-01/ESP-01S (This module does not include ESP-01/ESP-01S)
Interface: 3Pin PH2.0 connector
Working voltage: DC 3.7V-5V (please note: the power supply positive is the VCC on the board and the VCC on the WS2812 3PIN interface is connected together, so if your light bar/light ring is 5V power supply control, please use DC 3.7V-5V power supply.)
Support 3.7V lithium battery power supply

Application example:
1. Power supply: 3.7V-5V DC power supply is connected to VCC GND (2.54mm pin)
2. Download the program to ESP-01S
3. Insert the ESP-01/ESP-01S into the 2*4 Pin female

This is a WS2812 or WS2812B RGB LED controller based on the ESP-01 /ESP-01S. With this board, your will easy to make your colorful display project

Feature:
1.Main chip: ESP-01/ESP-01S (This board Not include the ESP-01/ESP-01S)
2.Interface: 3Pin PH2.0 for WS2812
3.Working voltage: DC 3.7V-5V (Support 3.7V Lipo battery)

Usage:
1.Power supply: 3.7V Lipo battery connect to the VCC GND (2.54mm male header)
2.Upload the code to ESP-01S(ESP-01)
3.Plug the ESP-01S(ESP-01) to the module