Mô Đun Điều Chỉnh Điện Áp Dc-dc Lm 2596 tại Lotte Market
Thương hiệu: | Xem thêm Quạt Thương hiệuMô tả ngắn về Mô Đun Điều Chỉnh Điện Áp Dc-dc Lm 2596 tại Lotte Market
Brand Sindhi Jia Electronics Returnable stable voltage martyrs m2596 with stable pressure calibrated with a voltmeter. Voltmeter Display, voltmeter errors 0. (Notes: Input voltage below 4v, plate loaded voltmeters do not work without display). The voltmeter can be closed, longer than 1 seconds and less than 4 seconds, loosen hands can close. 0) Pressing a short button can change the: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Mô Đun Điều Chỉnh Điện Áp Dc-dc Lm 2596 tại Lotte Market
Brand Sindhi Jia Electronics Returnable stable voltage martyrs m2596 with stable pressure calibrated with a voltmeter
Notes: There is no copper pillar in the petals.
Voltmeter Display, voltmeter errors 0.1. Persistence, range of measurement 0~40v. (Notes: Input voltage below 4v, plate loaded voltmeters do not work without display)
Create a single touch button to switch the measurement of input or madness voltage, and there are indicators showing which voltage is being measured, and keep the last mishap, even if the electricity is cut off and then the boot starts
The voltmeter can be closed, longer than 1 seconds and less than 4 seconds, loosen hands can close
Precise function of measuring error of voltage input and output, longer than 4 seconds, after loosening hands, enter the voltage measurement error accuracy function, lamps are lit (Quasi input terminals) The gnarled pipes show positive values (Factory output parameter 0.0) Pressing a short button can change the madness (The range is -0.5~0.5, the unit is the mishap.) Positive numbers indicate that they are upwards, a negative number represents a downward calibration. After adjusting the more quasi values of the input ends, long press button for more than 2 seconds, error checking at the end of the mishap after loosening hands, o Brightness (Standard mile) And display the calibration value of the mishap, the adjustment method is the same as the input terminal, after the better quasi values of the sticky ends, long press button for more than 2 seconds, remove the hand and save the setting and return to the normal display voltage, the setting of the school is immediately effective and does not lose electricity.
With connector terminals, it is convenient to use iron without branding, and retain the welding point
Input voltage 4.0~40v (The input voltage must be more than 1 V above the required voltages.)
Range of adjustable mishap voltage~37v continuously adjustable (The input voltage must be more than 1v above the voltages required for the martyr)
The maximum electricity available for the mileage is 3a, normal stable working current at 2a
Internal oscillation with 150 mileage z, belonging to the second generation of madness, low power consumption、 efficiency