Mô đun điện áp bán dẫn 4 kênh tại Lotte Market
Thương hiệu: | Xem thêm Thiết Bị Mạng Thương hiệuMô tả ngắn về Mô đun điện áp bán dẫn 4 kênh tại Lotte Market
This module is used when it is necessary to isolate the control in actual work and voltage conversion. 3V or 5V to control the interface of 3. After the control terminal is turned on, the controlled terminal will also be turned on. The latter can drive high-power triodes, MOS tubes and other applications that require high-voltage driving, and can also: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Mô đun điện áp bán dẫn 4 kênh tại Lotte Market
This module is used when it is necessary to isolate the control in actual work and voltage conversion.It can realize 3.3V or 5V to control the interface of 3.6--24V voltage level. After the control terminal is turned on, the controlled terminal will also be turned on.
Photoelectric isolation has strong anti-interference ability. The latter can drive high-power triodes, MOS tubes and other applications that require high-voltage driving, and can also directly drive low-power 24V relays.
If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
Module parameters:
1, the drive terminal signal voltage: 3.6-24V
2, the output voltage range: 3.6-30V (output current depends on the specific situation, but the maximum is not 10MA, the total power is certain, the voltage and current are inversely proportional)
3, through the jumper cap can achieve whether the output is high potential output or low output.
4. The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
5: board size: length: 48mm; width: 38mm; long side hole distance: 42mm; wide side hole distance: 32mm
We deal in wholesale and retail
Feel free to contact us
#817 #4-Channel #Optocoupler #Isolation #Board #Module