Mô Đun Công Tắc Cảm Ứng Điện Dung 10a Dc 5-12v Oe-Tp tại Lotte Market

Giới thiệu Mô Đun Công Tắc Cảm Ứng Điện Dung 10a Dc 5-12v Oe-Tp tại Lotte Market

OE-TP capacitive touch button light touch switch module digital touch sensor LED no pole dimming 10A DC 5-12V

Parameter:
Name: Touch dimming module (touch switch)
Specification model: OE-TP dimming (10A)
Power supply range: DC 5-20V recommended 12V power supply
Output current: sink current MAX: 10A recommended 3A work
Protection function: power supply reverse protection
Induction indication: output red light on
Working mode: configurable. (Default: fade with memory, note fade, stepless dimming) Touch distance
Touch distance: less than 6mm (glass acrylic)
Quiescent current: less than 5mA
Working temperature: -40-----85 ℃
Appearance size: 20x15x2mm
Remarks: touch the surface of other ceramics, plastics, wood and other media, and the thickness is less than 3mm

Common anode wiring method:
For example, to control a 12V light strip: The positive pole of the 12V power supply is connected to the VCC of the module. The negative terminal is connected to the GND of the module. The positive pole of the controlled light strip is connected to the VCC of the module. The negative terminal is connected to the OUT of the module. After power on, you can control the light strip by touching the module with your finger, and long press the touch to adjust the brightness of the light.
For example, to control the speed of a 12V motor: the positive pole of the 12V power supply is connected to the VCC of the module. The negative terminal is connected to the GND of the module. The positive pole of the controlled motor is connected to the VCC of the module. The negative terminal is connected to the OUT of the module. After power on, you can control the motor by touching the module with your finger, and long-press the touch to control the motor speed.

Control interface: a total of 3 pins (VCC, GND, OUT), VCC is the power supply, GND is the ground, and OUT is the digital signal output pin;

LED indicator: the green (blue) light is on when the power is on, the red light on the touch sensor output is on.

Touch area: the inner area of ​​the icon similar to a fingerprint, which can be triggered by a light touch of a finger.

Positioning holes: 2 M2 screw positioning holes with a diameter of 2mm, which makes the module easy to install and position and realize the combination between modules

Application: 12V light bar (LED) brightness adjustment touch control. 5-20V DC motor speed control.