Mô Đun Cảm Biến Trọng Lượng Hx711 Ad Bằng Kim Loại Chất Lượng Cao tại Lotte Market
Thương hiệu: | Xem thêm Thiết Bị Thể Thao Thương hiệuMô tả ngắn về Mô Đun Cảm Biến Trọng Lượng Hx711 Ad Bằng Kim Loại Chất Lượng Cao tại Lotte Market
this is FitowCool. Note: This is an optional listing. UNO Board is not included. HX711 Weighing Weight Sensor Electronic Scale AD Module Dual-channel 24-bit A/D Conversion Metal Shied Beus Load Cell Anti-Jamming. Onboard 2Pcs 47 uF bile capacitance. Two kinds of pin. Typical current : 1. Operation temperature range: -40 ~ +85℃. On-chip active low noise PGA with selectable gain: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Mô Đun Cảm Biến Trọng Lượng Hx711 Ad Bằng Kim Loại Chất Lượng Cao tại Lotte Market
Hello.this is FitowCool.vn store,welcome!Note: This is an optional listing. Pls select the correct item you want .
UNO Board is not included. Just for reference only.
HX711 Weighing Weight Sensor Electronic Scale AD Module Dual-channel 24-bit A/D Conversion Metal Shied Beus Load Cell Anti-Jamming
Chip: HX711
Onboard 2Pcs 47 uF bile capacitance
Reserved CPU welding position ,not include the CPU
Two kinds of pin
Operation supply voltage range: 2.6-5.5V
Typical current : 1.7 mA
Size:29mm*17mm*4mm
Operation temperature range: -40 ~ +85℃
Two selectable differential input channels
On-chip active low noise PGA with selectable gain of 64 and 128
On-chip power supply regulator for load-cell and ADC analog power supply
On-chip oscillator requiring no external component with optional external crystal
On-chip power-on-reset
Simple digital control and serial interface: pin-driven controls, no programming needed
Selectable 10SPS or 80SPS output data rate
Simultaneous 50 and 60Hz supply rejection
1/2/3/5/10/20KG Scale Load Cell Weight Weighing Sensor
Four leads, easy to use,
5-10V drive voltage applied, the force is directly output as a voltage change signal.
Dimensions: 12.7mm * 12.7mm * 80mm
Sensor through the screw hole at one end fixed and the other end to keep floating state, applying gravity following the direction indicated by label
Particular attention must not directly push the white plastic cover part, so as not to damage the sensor
Connection:
Red wire to E+
Black wire to E-,
Green wire to A+
White wire to A-
Have a nice day!