Mô Đun Cảm Biến Dấu Vân Tay Quang Học Cho Mega2560 R3 Raspberry Pi 3 tại Lotte Market
Thương hiệu: | Xem thêm Mạch & Bộ phận điện Thương hiệuMô tả ngắn về Mô Đun Cảm Biến Dấu Vân Tay Quang Học Cho Mega2560 R3 Raspberry Pi 3 tại Lotte Market
#Optical #Fingerprint #Reader #Sensor #Module #For #Mega2560 #R3 #Raspberry #Pi #3. Make adding fingerprint detection and verification super simple. Connect to any microcontroller or system with TTL serial, and send packets of data to take photos, detect prints, hash and search. There's a red LED in the lens that lights up during a photo so you know it is working.: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Mô Đun Cảm Biến Dấu Vân Tay Quang Học Cho Mega2560 R3 Raspberry Pi 3 tại Lotte Market
#Optical #Fingerprint #Reader #Sensor #Module #For #Mega2560 #R3 #Raspberry #Pi #3Optical Fingerprint Reader Sensor Module For Mega2560 R3 Raspberry Pi 3
Features:
Make adding fingerprint detection and verification super simple.
Typically used in safes-there's a high powered DSP chip that does the image rendering, calculation, feature-finding and searching.
Connect to any microcontroller or system with TTL serial, and send packets of data to take photos, detect prints, hash and search.
You can also enroll new fingers directly - up to 162 finger prints can be stored in the onboard FLASH memory.
There's a red LED in the lens that lights up during a photo so you know it is working.
Specifications:
Back light: Green
Supply voltage: DC 3.8-7.0V
Operating Current: <65mA
Peak current: <95mA
Fingerprint image time: <0.5 seconds
Window area: 14.5x19.4 mm
Signature File: 256 bytes
Template files: 512 bytes
Storage capacity: 1000
False Accept Rate (FAR): <0.001% (security level 3)
False Reject Rate (FRR): <1.0% (security level 3)
Search time: <1.0 seconds (1: 500 average)
PC interface: UART (TTL logic level)
Baud rate (UART): (9600xN)bps (N=1~12, N default 6, equal 57600bps)
Working environment: Temperature: -20 °C to 60 °C
Relative Humidity: 40% RH to 85% RH (non-condensing)
Storage Environment: Temperature: -40 °C to 85 °C
Relative humidity: <85% H (no condensation)
Lighting: Long light/Flashing
Size: 5.3x2x1.9cm/2.09x0.79x0.75inch
Quantity: 1 Pc
Note:
There are basically two requirements for using the optical fingerprint sensor. First is you'll need to enroll fingerprints - that means assigning ID #'s to each print so you can query them later. Once you've enrolled all your prints, you can easily 'search' the sensor, asking it to identify which ID (if any) is currently being photographed.
You can enroll by using the windows software (easiest and neat because it shows you the photograph of the print) or with the sketch (good for when you don't have a windows machine handy or for on-the-road enrolling)
Package includes:
1 x Fingerprint reader module
1 x Cable