Máy Scan Mã Vạch Elm327 V1.5 Bluetooth & Wifi Obd2 / Obdii Cho Xe Hơi tại Lotte Market
Thương hiệu: | Xem thêm Bộ phận động cơ Thương hiệuMô tả ngắn về Máy Scan Mã Vạch Elm327 V1.5 Bluetooth & Wifi Obd2 / Obdii Cho Xe Hơi tại Lotte Market
Welcome to trendystore2018. Color: red (WIFI);. Chip: PIC18F25K80. Subnet: 255. Range: 50 feet (line of sight). Power consumption: 0. IP: 192. Wifi standard: 802. Working temperature: -15 to 100 degrees Celsius. Connection method: mobile phone Bluetooth, WIFI connection. Product Features:. Fuel consumption. Fuel pressure. Throttle position. Intake air temperature. Air mass flow. air pressure. Fuel curve. SAE J1850 PWM (41.: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Máy Scan Mã Vạch Elm327 V1.5 Bluetooth & Wifi Obd2 / Obdii Cho Xe Hơi tại Lotte Market
Welcome to trendystore2018.vn !Description:
Color: red (WIFI);
Material: ABS+PC electronic components
Chip: PIC18F25K80
Version: WIFI version
Subnet: 255.255.255.0
Port: 35000
Range: 50 feet (line of sight)
Antenna: internal
Power consumption: 0.75 watts
IP: 192.168.0.10
SSID: WiFiOBD
Wifi standard: 802.11a / b / g
Working temperature: -15 to 100 degrees Celsius
Uses: car fault diagnosis, car fault code reading
Connection method: mobile phone Bluetooth, WIFI connection
Product size: 8.5*4.5*2.5cm
Product Features:
By installing the appropriate software on your host device, you may read the following parameters from the vehicle:
Speed
2. Speed
3. Fuel consumption
4. Engine coolant temperature
5. Fuel pressure
6. Calculated engine load
7. Throttle position
8. Intake manifold pressure
9. Intake air temperature
0. Time ahead
A. Air mass flow
B. oil level
C. air pressure
D. EVAP system vapor pressure
E. Fuel curve
Supporting agreement:
1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW (10.4Kbaud)
3.ISO9141-2 (5 baud init, 10.4Kbaud)
4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5.ISO14230-4 KWP (fast init, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
A.SAE J1939 CAN (29bit ID, 250*Kbaud)
B.USER1 CAN (11*bit ID, 125*Kbaud)
C.USER2 CAN (11*bit ID, 50*kbaud)
*Default settings(user adjustable)
Support for cars: If your vehicle does not fall into the above categories, look under the hood and try to find a label that clearly indicates that the vehicle is designed to comply with OBD-2 regulations.
This elm327 can usually be used with OBD 16pin adapters and 12V engines on most new cars:
American car brand, after 1996;
After 2001, it was a European automobile brand (gasoline);
After 2004, it is a European automobile brand (diesel);
After 2002, it is a Japanese car brand;
Korean car brand, after 2010;
For Chinese car brands, after 2009;
Indian car brand, after 2010;
Russian car brand, after 2012;
Hardware requirements: for Android, for IOS, for Windows
NOTE:Bluetooth version only supports Android system, WIFI version supports Android and IOS system
* Firmware version V1.5 (supports more protocols SAE J1850 than V2.1).
* With chip: PIC18F25K80, supports all elm327 functions, and displays all functions in the program ELM327 identifier.
* It understands commands such as ATPPS.
*The crystal oscillator has a frequency of 4mHz.
*Read a lot of vehicle information by installing the appropriate software on the host device.
Packing list:
1*ELM327 OBD Diagnostic