Máy Phát Điện Áp Cao 20KV Biến Áp tại Lotte Market
Thương hiệu: | Xem thêm Thiết Bị Điện Gia Dụng Thương hiệuMô tả ngắn về Máy Phát Điện Áp Cao 20KV Biến Áp tại Lotte Market
Double high voltage cable can ignite cigarette and paper, a single high voltage cables can provide power to a metal body, and no sound support. Over power:. The high-voltage module should avoid the use of high-voltage current without a load. Experimental testing of the arc distance from short to long. Due to the performance, the internal heat is not easy,: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Máy Phát Điện Áp Cao 20KV Biến Áp tại Lotte Market
Feature:Double high voltage cable can ignite cigarette and paper, a single high voltage cables can provide power to a metal body, and no sound support.
The module can be used as high-school scientific experiments, electronic devices, negative-ion generator, high-voltage source, to use when small science.
Over power:
Single 18650 or idle mobile phone batteries (the protective plate to remove the planned capacity of 2000mAh or more).
Note:
1. The high-voltage module should avoid the use of high-voltage current without a load. Power must be set to a suitable distance to the high voltage output line, the battery capacity is proportional to the distance and the use of the high pressure arc (not a voltage as high as possible, must provide sufficient current).
2. Experimental testing of the arc distance from short to long. If you do not exceed the maximum arc gap current, energy is not released by high pressure, the module can be easily damaged.
3. Due to the performance, the internal heat is not easy, each operating time should be set within 5 seconds.
Specification:
Material: metal, plastic
Color: As shown in the figure
Size: As shown in the figure
Input voltage: 3.7V-6V
Input current: ≤0.5A
Input line length: about 10 cm
High voltage type: pulse DC type
Output voltage: about 15KV (please pay attention to safety when using)
Output current: ≤0.5A
Output cable length: about 10 cm
Ignition distance between high voltage poles: ≤0.5cm
Package included:1 x 20 kV high pressure igniter