Máy Phân Tích Sóng Wifi Ming Nanovna 50khz-900mhz tại Lotte Market
Thương hiệu: | Xem thêm Bộ Kích Wifi Thương hiệuMô tả ngắn về Máy Phân Tích Sóng Wifi Ming Nanovna 50khz-900mhz tại Lotte Market
Welcome to mingxuan2. Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Máy Phân Tích Sóng Wifi Ming Nanovna 50khz-900mhz tại Lotte Market
Welcome to mingxuan2.vn !
Description:
Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 900MHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50535-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.
This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 500mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.
Specification:
PCB: 54mm x 85.5mm x 11mm (without connectors, switches)
Measurement Frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware)
RF output: -13dbm (maximum -9dbm)
Measurement range: 70dB (50kHz-300MHz), 60dB (300M-600MHz), 50dB (600M-900MHz) enable extended firmware);
Port SWR: < 1.1
Display: 2.8 inch TFT (320 x240)
USB interface: USB type-C communication mode: CDC (serial)
Power: USB 5V 120mA, built-in 400mAh battery , maximum charging current 0.8A
Number of scanning points: 101 (fixed)
Display Tracking: 4, Marking: 4, Setting Save: 5
Measuring S parameters, voltage standing wave ratio, phase, delay, Smith chart...
Package List:
1X NanoVNA Host
1X USB Type-C DataCable
2X 30cm SMA male to Male RG174 RF Cable
1X SMA Simple Calibration Kit
1X SMA Female to Female Connector