Máy pha cà phê nhỏ giọt V60 tại Lotte Market

Giới thiệu Máy pha cà phê nhỏ giọt V60 tại Lotte Market

Lilydrip coffee dripper transformer brewer filter paper inverter Compatible for most cone dripper V60 brewer set help brewing
Details

* Material: Ceramic （whtie) + plastic (black).

* Parameter:
LILY+CFS:4.3*4.3*7.3cm/ABOUT 50g;
COS+CFS:4.3*4.3*7.3cm/ABOUT 50g;
STARFLOWER+CFS:4.3*4.3*7.3cm/ABOUT 50g;
DONUT+CFS:4.3*4.3*7.3cm/ABOUT 50g;
GIO+CFS:4.3*4.3*7.3cm/ABOUT 50g;


* SPEED UP BREWING: shorten the depth of coffee bed, which allows you to speed up the brewing with a same grind setting, and also allows you to grind the coffee finer without brewing way too long.

* EVEN BREWING: Thinner coffee bed can also benefit the evenness of your brew. Upper layer and lower layer of coffee bed are closer to each other, the different of extraction levels are smaller. As it allows you to grind coffee finer, distance between particle surface and core will be shortened too(same issue as the upper lower layer).

* HOLDING BREWING TEMPERATURE: adding a mass of ceramic into your brewer can help holding your temperature at the beginning of your brew, and maintaining your temperature at the end, newest brewing temperature concept based on scientific experiments.

* CHANGE COFFEE FAVOR: brew coffee with Lilydrip , it make your coffee rich favor and make brewing more fun.


How to brew with the LilyDrip?

1.Gather your materials.
You’ll need your pour over filter (the Hario v60 is used in these photos), the LilyDrip ceramic piece and the “Rapid Filter Shaper”

2.Shape the filter.
First fold the filter along the crease and then place the filter on top of the “Rapid Filter Shaper.” Use your finger to gentle press the filter into the shaper to form an inverse cone. You can also use the LilyDrip to help shape the filter (but be careful not to rip the paper).

3.Place the LilyDrip ceramic piece within the brewer.
Gently place the ceramic LilyDrip at the bottom of any cone shaped brewer. The LilyDrip helps the filter maintain the inverse cone shape during brewing.

4.Place the filter on top of the LilyDrip.
You may also wet the filter at this stage.

5.Add coffee grounds to the brewer.
On top of the LilyDrip and the filter and your coffee grounds. Pour them easily around the filter and give them a gentle shake to level them out. After the grounds are in place you are ready to brew your pour over coffee as usual.