Máy Đùn V6 Hotend 1.75mm Cho Máy In 3d Prusa I3 Reprap tại Lotte Market
Thương hiệu: | Xem thêm Máy In 3D Thương hiệuMô tả ngắn về Máy Đùn V6 Hotend 1.75mm Cho Máy In 3d Prusa I3 Reprap tại Lotte Market
Is equipped with NTC3950 thermistors and 12V 40W heater,12V fan. 4mm nozzle. 4mm and 0. Use all metal heatbreaks for higher melting point plastics and PTFE lined for easy print with PLA. Resistance value at 25 Celsius=100K. Size:Line length is about 1m. 1 x All Metal V6 hotend 1. 13A with shroud. 1 x PC4-M6 Tube Fitting. 1 x V5,V6: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Máy Đùn V6 Hotend 1.75mm Cho Máy In 3d Prusa I3 Reprap tại Lotte Market
Is equipped with NTC3950 thermistors and 12V 40W heater,12V fan. It is pre-assembled with all metal heatbreak and 0.4mm nozzle.2 x extra heatbreaks,one all metal,anther one PTFE lined;piece of PTFE liner tubing for repairs;3 x extra nozzles-0.3mm,0.4mm and 0.5mm;PC4-M6 and PC4-01 tube fittings for extruder cold end;Hex driver. Use all metal heatbreaks for higher melting point plastics and PTFE lined for easy print with PLA.
High accuracy:1%
Resistance value at 25 Celsius=100K
Color:color as shown
material:metal
Size:Line length is about 1m
Package Contents:
1 x All Metal V6 hotend 1.75mm/0.4mm nozzle/Fan 30mm 12V 0.13A with shroud
1 x One Meter long Bowden tubing 4mm OD 2mm ID
1 x PC4-M6 Tube Fitting
1 x PC4-01 Tube Fitting
1 x V5,V6 compatible nozzle 0.3mm
1 x V5,V6 compatible nozzle 0.4mm
1 x V5,V6 compatible nozzle 0.5mm
1 x All metal heatbreak for 1.75mm
1 x PTFE lined heatbreak for 1.75mm
1 x piece of PTFE liner tubing for repairs
1 x Hex driver.
1 x Thermal Protection Silicone Sock.Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.