Máy Bơm Nước Mini Chịu Nhiệt 385 6v-12v 100 Độ C tại Lotte Market

Thương hiệu: | Xem thêm Dụng cụ & thiết bị lớn Thương hiệu  

Mô tả ngắn về Máy Bơm Nước Mini Chịu Nhiệt 385 6v-12v 100 Độ C tại Lotte Market

#385 #6V-12V #High #Temperature #Resistance #100 #Degrees #Celsius #Mini #Micro #Water #Pump. Is powered by the motor rotation, by means of the eccentric wheel motor shaft, drive rubber loop, reciprocating motion, suction and discharge inside the cavity formation action, through the check valve closed, open, so as to achieve suction and discharge of gas and liquid. 7l /min. Large and
: Còn hàng
: Shopee
56.665đ 108.000đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Máy Bơm Nước Mini Chịu Nhiệt 385 6v-12v 100 Độ C tại Lotte Market

#385 #6V-12V #High #Temperature #Resistance #100 #Degrees #Celsius #Mini #Micro #Water #PumpMáy Bơm Nước Mini Chịu Nhiệt 385 6v-12v 100 Độ C
Features:
Micro dc has brush diaphragm pump, gas and liquid, it is based on the volume pump original design. Is powered by the motor rotation, by means of the eccentric wheel motor shaft, drive rubber loop, reciprocating motion, suction and discharge inside the cavity formation action, through the check valve closed, open, so as to achieve suction and discharge of gas and liquid.It can draw cold water or hot water, which can reach the water flow of 1.3-1.7l /min.
A pump that pumps hot water;
Large and quiet water flow;
Exquisite workmanship and durable structure;
Gas-liquid (more suitable for liquids)Máy Bơm Nước Mini Chịu Nhiệt 385 6v-12v 100 Độ C

Specifications:
Working Voltage: DC 12V
Traffic: 1.3L-1.7L / Min(approx)
Size: 8.4cm(3.31in) ,Wide: 2.4cm(0.94in)
Quantity: 1 PcMáy Bơm Nước Mini Chịu Nhiệt 385 6v-12v 100 Độ C

Note:
Use environment and matters needing attention:
1. The water pump is suitable for electric tea stoves or water pumps;
2. Water pump is not suitable for: with filter plug, filter screen or water inlet and outlet pipes are too long (generally suitable for pipe length 0.6-1 meters); not suitable for use under the conditions of high inlet water pressure or high water outlet resistance. Directly connect to the water pipe;
3. The inlet and outlet of the water pump are suitable for the use of silica gel pipes, but not PVC pipes or corrosive liquid bonding;Máy Bơm Nước Mini Chịu Nhiệt 385 6v-12v 100 Độ C
4. The whole cannot be in contact with water (steam, damp places, etc.);
5. Liquid requirements: ordinary clean water (no impurities, viscous or corrosive liquids);
6. Operating environment temperature: 10℃ to 40℃;
7. Water temperature requirements: room temperature water temperature (about 5℃~40℃);
8. Use the corresponding voltage to drive, if the voltage is too high, it will damage the pump, and if the voltage is too small, it will not be able to drive it.

Package Contents: (No retail package)
1 Pc x Mini Pump

Chi Tiết Máy Bơm Nước Mini Chịu Nhiệt 385 6v-12v 100 Độ C