Máy bơm hơi lốp xe kỹ thuật số 12V tiện dụng tại Lotte Market

Giới thiệu Máy bơm hơi lốp xe kỹ thuật số 12V tiện dụng tại Lotte Market

️Package Included:
1 * inflation pump; 3 inflation nozzle


️Specifications:
Model:
[st-2900-22d] gas pump 22 cylinders - digital display type
[st-2900-22z] inflation pump cylinder 22 - pointer type
[st-2900-19d] gas pump 19 cylinder - digital display type
[st-2900-19z] pneumatic pump cylinder 19 - pointer type
Material: ABS
Weight: gross weight (about) 0.850k
power line length: about 285cm
Size: About 19.5 * 13.5 * 6cm
Packaging Size：215 * 147 * 85mm
output power: 120 (W)
rated voltage: DC12 (V)
inflation flow: 35L / min
lighting lamp: 1 LED


️Description:
▶This machine is suitable for 12V automobile tires， It is also suitable for motorcycles, bicycles, balls, rubber boats, beach floating beds, inflatable toys, etc.
▶Maintaining the correct tire pressure can ensure driving safety, save gasoline, and use it with the car, in case of any accident, it has infinite wonderful use.
▶Equipped with a complete set of inflation nozzles.


️Use:
1.Insert the air nozzle at the top of the rubber tube directly on the tire valve. When hearing the sound of air leaking from the tire, it means that the air has been circulated. Continue to tighten the air nozzle. At this time, the air will not leak out.
2.Insert into DC12V cigarette lighter
3.During inflation, the gauge pointer will rise with the tire saturation degree. When the pointer reaches the appropriate tire pressure (generally, the tire pressure of car tire is 223kpa = 35psi), take out the plug and air nozzle to complete the work.
4.Please use the professional ball needle and plastic nozzle equipped with the machine to connect with the air nozzle to inflate the ball and other gas equipment.


️Tips:
1. It is not allowed to inflate the tires of large and overweight vehicles, such as trucks, vans, container trucks, etc.
2. When using, please start the car engine to enhance the power, and do not consume the car battery power;
3. DC (DC12V) power supply is limited for this machine, and domestic high-voltage AC (AC220V) power supply is not allowed;
4. When charging, please stop the machine for 10 minutes after 10 minutes of continuous operation to cool down, so as to prevent damage to the air pump and accessories, and extend the service life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes;
5. In general, when the tire is inflated, it can reach 30psi normal tire pressure in about 3-5 minutes, and it will take longer for large tire; if the indicator of the instrument rises to 50-100psi rapidly at the beginning of inflation, it means that the air is blocked, and the air does not enter the tire. At this time, it is necessary to immediately unplug the air nozzle connector and operate again, otherwise the motor and instrument are easy to be damaged.
6. When using, do not leave the body, pay attention to the tire pressure at any time, and do not oversaturate.