Máy Bơm Chìm Tự Động 12v 1100gph 12v 1100gph Cho Tàu Thuyền tại Lotte Market

Giới thiệu Máy Bơm Chìm Tự Động 12v 1100gph 12v 1100gph Cho Tàu Thuyền tại Lotte Market

12V 1100GPH Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto Bilge Pump with Float Switch

Features:
You will purchased one of the best quality bilge pumps available in the  industry. It was developed after years of experience,research and testing by our research staff and thousands of user.
It is built to give years reliable trouble free performance.
No separate float switch is needed.
Fully automatic bilge pump.
Built-in float switch system.

No power use until pump turns on when  water rises.
Built with compact, efficient, long life motor.
Ignition and corrosion protected stainless steel shaft.
High-impact durable plastic housing .
Quick release strainer for easy maintenance.
Extremely efficient, very low current.
Includes comprehensive user manual with installation instructions and wiring diagram.

Ideal for fishing boats, cruise ship, yachts, etc. 

Specifications:
Material: Engineering Plastics
Packing: Carton
Type: Non-Automatic
Drive Mode: electrodynamic

Pump Shaft Position: Horizontal
Impeller Structure: Open type
Impeller suction: Single Suction
Length Of The Wire: 1m / 39in
Voltage: 12V , 24V (optional)
Flow Rate: 600GPH, 750GPH , 1100GPH, (optional)
Model:(optional)

(1) 12V 600GHP: current= 2.8A, pump lift=2m /78in,  Discharge Diameter=19mm (3/4”)
(2)12V 750GPH: current= 3.0A, pump lift=3m /117in,  Discharge Diameter=19mm (3/4”)
(3)12V 1100GPH: current= 3.8A, pump lift=4m /157in,  Discharge Diameter=29mm (1/8”)
(4)24V 600GPH: current= 1.4A, pump lift=2m /78in,  Discharge Diameter=19mm (3/4”)
(5)24V 750GPH: current= 1.6A, pump lift=3m /117in,  Discharge Diameter=19mm (3/4”)
(6)24V 1100GPH: current= 2.0A, pump lift=4m /157in,  Discharge Diameter=29mm (1/8”)
Product Size: 14.5*10*8cm / 5.7*3.9*3in

Product Weight: 491g / 17.32oz
Package Size: 16*11.5*8.5cm / 6.3*4.5*3.3in
Package Weight: 554g / 19.56oz
Tips:
1. Auto bilge pump can only be used for pumping water. It can not be used for other liquilds.
2. While installing,connect the pump's black wire to the negative(-) terminal and brown or brown white wire to the positive pole(+).
3.Use the suitable fuse.

4.The wire connections must be sealed by marine sealant.
5.All wires and connections must be above the bilge water level. Uniess necessary,please do not arbitrarily remove the insulator. Marine sealant oxidant should be used for all wires.
6.Not dry running.

Package List:
1 * Pump
1 * English User Manual