Màn Hình Hiển Thị 1.8 Inch Spi Tft St7735 Cho Arduino tại Lotte Market

Giới thiệu Màn Hình Hiển Thị 1.8 Inch Spi Tft St7735 Cho Arduino tại Lotte Market

Large resolution of 128x160 pixels for clear display of texts, image and pictures.
Via the 1.8-inch TFT display you can leave the computer off and get the data directly from your micro-controller as well as the SD card reader on the back of the board.
Bright, anti-reflective TFT display with large 1.8-inch diagonal screen and integrated SD card reader. Its large resolution of 128x160 pixels gives a clear presentation of text, image, and images.
With a 1.8-inch diagonal screen and 128x160 pixel resolution, the matte surface and luminous but efficient back-light (max. approx. 50 mA) also allows for use in bright lit environments.

Pins required for SD card reader (not included)
IO for the most streamlined wiring: (At least 3 IOs are required)
1.RST-directly connected to the reset signal terminal of the microcontroller, this IO can be saved
2.CS-connect to low level, the chip select is valid for a long time, this IO can be saved
3.AO-Connect IO control register selection
4.SDA-Connect IO to control data transmission
5.CLK-Connect IO to control SPI bus
6.LED-connect the high-level chip with 3.3V backlight and the IO can be saved
IO used for standard wiring: (6 IO)
1.RST-Connect IO to control LCD reset
2.CS-Connect IO control chip selection
3.AO-Connect IO control register selection
4.SDA-Connect IO to control data transmission
5.CLK-Connect IO to control SPI bus
6.LED-connect IO to control backlight on and off or PWM to control brightness
size:57.8x34x7.5mm
Material:PCB
colour:Black+red

Package Contents:
1 * 1.8 inch SPI TFT Display uleOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.