Mạch hẹn giờ kỹ thuật số DC12V AC110V / 220V tại Lotte Market

Giới thiệu Mạch hẹn giờ kỹ thuật số DC12V AC110V / 220V tại Lotte Market

DC12V AC220V/85-265V Digital Display Time Relay Module Timer Cycle Control Relay Module

100% brand new and high quality



Features:

Timing range: 0-999ms, 0-999s, 0-999m, 0-999h

Power supply voltage: DC12V, AC85-265V (110V 220V)

Static power: <0.6W

Power: <2000W(maximum)

Working current: 10A(maximum)

Dimensions: 71x39x25mm/2.8x1.54x0.98inch

Color: Black

Quantity: 1 Pc

Note: 1.DC and AC wiring are the same, the positive pole corresponds to the live line, and the negative pole corresponds to the neutral line.

2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.

3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!



Package includes:

1 x Time Delay Relay Module



---------------------------------

Product use instructions:

This product has four function keys: increase button, decrease button, set button, confirm button

After the user gets the product, first understand the function buttons of the product, which is beneficial to the customer's next use.



Time setting: Short press the setting button, the T1 digital tube will flash. During the flashing period, the timing time T1 is set by adding or subtracting the button. After setting, press the setting button again, the T2 digital tube will flash, and the button will be added or subtracted during the flashing. Set the timing time T2. There are two ways to save data after setting. The first can wait for 6s, the digital tube stops flashing, the system automatically saves the setting time, and the second can press the setting button again to save the data.



Parameter setting: Press and hold the setting button to enter the parameter setting mode. There are three sets of parameters for the user to set P0, P1, P2.

P0: Timed range, P1: Operating mode, P2: Display brightness adjustment. P0, P1, P2 can be switched by short pressing the setting button. Under the corresponding parameters, the corresponding parameters can be set by adding or subtracting by pressing the button.

P0--0 represents a timing range of 0.1 seconds.

P0--1 represents the timing range is seconds.

P0--2 represents the timing range is a fraction.

P0--3 represents the timing range is time.

P1--0: Relay delay after T1 time (T1 timing).

P1--1: The relay is released after the delay of T1 time (T1 timing).

P1--2: After the delay time T1, the relay is closed (T1 timing), and then the relay is released after T2 time (T2 timing), and ends.



For example: For example, a customer needs to turn on the machine for 10 seconds, shut down for 20 seconds, and cycle. The setting method is as follows:

T1 sets time 10, T2 sets time 20

P0-1 (T1 timing range is seconds)

P1—5 (the timer working mode is to stop and cycle all the time after working)