Mạch điều khiển động cơ bước 4 lớp Drv8825 cho máy in 3D tại Lotte Market

Thương hiệu: | Xem thêm Máy In 3D Thương hiệu  

Mô tả ngắn về Mạch điều khiển động cơ bước 4 lớp Drv8825 cho máy in 3D tại Lotte Market

2 set Electronic Accessories:1 x DRV8825 stepper motor driver & 5 x BPW34 Silicon PIN Photodiode. BPW34 Silicon PIN Photodiode. 2V~45V 2. six different stepping es: full, half, 1/4, 1/8, 1/16, 1/32;The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate;. overheat shutdown circuit, undervoltage lockout, cross current protection;. colour:Purple + black + Blue sier.
: Còn hàng
: Shopee
133.000đ 133.000đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Mạch điều khiển động cơ bước 4 lớp Drv8825 cho máy in 3D tại Lotte Market

2 set Electronic Accessories:1 x DRV8825 stepper motor driver & 5 x BPW34 Silicon PIN PhotodiodeMạch điều khiển động cơ bước 4 lớp Drv8825 cho máy in 3D
100% new high quality
BPW34 Silicon PIN Photodiode
It is suitable for driving stepper motors up to 8.2V~45V 2.5A;only simple step and direction control interface;Mạch điều khiển động cơ bước 4 lớp Drv8825 cho máy in 3D
six different stepping es: full, half, 1/4, 1/8, 1/16, 1/32;The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate;

Automatic current decay e detection/selection;Mạch điều khiển động cơ bước 4 lớp Drv8825 cho máy in 3D
overheat shutdown circuit, undervoltage lockout, cross current protection;
ground short circuit protection and load short circuit protection
colour:Purple + black + Blue sierMạch điều khiển động cơ bước 4 lớp Drv8825 cho máy in 3D
Material:metal + ABS
size:1.5x2cm + 5 x 5mm

Package Contents:
1 x DRV8825 stepper motor driver
5 x BPW34 Silicon PIN PhotodiodeOnly the above package content, other products are not included.Mạch điều khiển động cơ bước 4 lớp Drv8825 cho máy in 3D
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Chi Tiết Mạch điều khiển động cơ bước 4 lớp Drv8825 cho máy in 3D