Khuôn nặn đất sét dollhouse minifood khay thức ăn bento tại Lotte Market

Giới thiệu Khuôn nặn đất sét dollhouse minifood khay thức ăn bento tại Lotte Market

type size: body · 38 × 38 × 10 mm
　partition · (short) 7 × 11 × 1 mm (medium) 7 × 17 × 1 mm (long) 7 × 36 × 1 mm
amount of clay necessary for one motif
　body 4.5 g partition (Short / Medium) 1g or less (Long) 2g Usable

materials: Resin clay · Lightweight clay · Oven clay · Resin (In addition, it is not a mirror finish.)
Unusable material: Silicone material
Material: Silicone rubber
Sales source: (stock) Nisshin Associates

■ Cautions for using
clay Measure the specified amount of clay and pack it in a mold to reduce burr processing.
When filling with clay, put it in a concave shape (if you retract it), stick it to the side with your finger, etc., make the clay spread throughout the concave shape, and set the convex shape.
If you roll the clay to the convex side first and set the concave shape, it is easy to make wrinkles on the side.

■ Cautions when using resin
* In the case of a shape where air bubbles are likely to enter in the corner, paint the resin with a brush etc. on the part where air bubbles are likely to be accumulated first and then pour the resin into
it. Polish with abrasives or spray with acrylic spray
* UV resin has some things that can not use abrasives. Also, depending on the manufacturer, there is a UV resin / two-component mixed resin that is very easy to damage the mold.