Kẹp Thử Điện SOP 8-Pin BIOS Rộng Và Hẹp 8-Pin tại Lotte Market

Giới thiệu Kẹp Thử Điện SOP 8-Pin BIOS Rộng Và Hẹp 8-Pin tại Lotte Market

Need To Know:
Some Boards Can Directly Clamp The Chip, But Some Boards Cannot Be Operated In This Way, Because The Chip Will Be Affected By The Peripheral Circuit On The Board, Please Know Before Taking The Picture, So As Not To Buy It Back And Not Use It, But Soldering The Chip Down Is Quite A Universal Socket The Same Can Be Used Directly, And Both Wide-Body And Narrow-Body Are Common.
Many High-Power Programmers Can Basically Be Used Normally



When Encountering A Programmer With A Protected Function, The Clip Cannot Be Read Under Normal Voltage. At This Time, A 3.3v Voltage Needs To Be Added. The Method Is: The Clip Clamps The Chip, And The Chip Corresponds To Pin 8. Apply A 3.3v Voltage To The Pin. Generally, There Are Two Wires For The 3.3v Power Supply, Then Vcc Corresponds To The Clamp, And The Other Wire Is Directly Grounded.



Description：
1. Model: Sop8 Foot Bios Clip
2. Type: Other Ic
3. Purpose: Test Clip
4. Style: Good Clip Welding + Double Green Board, Good Clip Welding + Single Green Board, Sop 8 Clip, Sop 8 Clip Band (Without Board)



Package Include： 1 X Programmer Test Clip



Notes:
1.Transition:1cm=10mm=0.39inch
2.Please Allow 1-3mm Error Due To Manual Measurement. Pls Make Sure You Do Not Mind Before You Bid.
3.Due To The Difference Between Different Monitors, The Picture May Not Reflect The Actual Color Of The Item. Thank You!