Kéo chiết ghép cành cây đa năng tại Lotte Market

Giới thiệu Kéo chiết ghép cành cây đa năng tại Lotte Market

Features:
Rootsto and scion it is easy to match the U-cut-cut or Ω-cut, rapid healing
Using easily and fastly. Grafting method than the traditional savings
The time and effort Blade can be replaced
Use the pruner to cut useless branches from the plant

Specifications:
For the knife
Materials: carbon steel, ABS and Aluminum
Color bla
Cut grafting stos from 5mm up to 1.4cm diameter
Trimming blades 3mm thi
Phillips screwd with red handle
Size 27cm * 10cm/10.5inch * 3.9inch
(1cm=0.39Inches)
A wrench
2 additional blades

How to use:
Step 1: Hold the grafting sto in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the sto plant.
Step 2: Slide the donor stem into the groove of the sto plant, matching the cut surfaces as closely as possible. If the sto and donor plant are not the same size, match on the side only.
Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
Step 5: The grafting tool with \”V & U & Ω\” blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.

Note:
Keep out of reach of children do not use on dry or old hard wood