Helium066 Màn hình LED DC 5-30V Độ trễ Bật / Tắt Mô-đun Tiếp điểm Kích hoạt Công tắc hẹn giờ Chu kỳ tại Lotte Market

Giới thiệu Helium066 Màn hình LED DC 5-30V Độ trễ Bật / Tắt Mô-đun Tiếp điểm Kích hoạt Công tắc hẹn giờ Chu kỳ tại Lotte Market

Welcome to the helium066 store!
ready to send good quality best price
【Purchase Notes】
1. All products are shipped from overseas, the goods will arrivewithin 1-2 weeks
2. Good quality, group purchase price, please leave a message to customer service
3. If you have any questions, please contact us, we will be happy to solve with you.
Follow us----Leave a message after placing an order----free gift
Thank you so much for your visit

Features:
1. 0.1 seconds to 999 minutes continuously adjustable. 
2. Wide power supply voltage (6~30V), supports micro USB 5.0V power supply.
3. One-key emergency stop function, with reverse polarity protection to prevent burn-out.
4. Add sleeping mode, no operation for 5 minutes, automatically turn off the display, and press any button to wake it up.
Different OP, CL and LOP parameters can be set, which are independent and saved separately.
All setting parameters are automatically saved after power-off.
 

Specification:
Supply voltage: DC 6-30V, supports micro USB 5.0v power supply
Trigger signal: High level (3.0V-24V) (The signal and system don't use the same GND port)
Output capacity: DC 30V/5A, AC 220V/5A
Static current: 20mA
Working current: 50mA
Life: >100,000 times
Working temperature: -40~85℃
Size: 6.2*3.8*1.7cm / 2.44*1.5*0.67om
Weight: Approx. 27g
 
Instruction: 
1. Working Mode:
P1: After signal triggers, the relay opens for ”OP” time, and then disconnect; in the ”OP” time, as follows:
P1.1: signal is triggered again, invalid
P1.2: signal is triggered again, restart the timing
P1.3: Give trigger signal, the relay closes for ”CL” time, then opens for  OP” time; After finishing the timing, disconnect the relay;
P3.1: Give trigger signal, the relay opens for ”OP” time, then closes for  CL” time, then the operation cycles; if give trigger signal again during the cycle, the relay opens, stop timing; the cycles times ( ”LOP ”) can be set.
P3.2: No triggering signal required after power on, the relay opens for ”OP” time, then closes for ”CL” time, then the operation cycles; the cycles times ( ”LOP ”) can be set.
P-4: Signal holding function: If there is trigger signal, timing is cleared, the relay remains on; when the signal disappears, after ”OP” time, the relay is off; if another signal is triggered during timing, timing will be cleared.
 
2. How to Set Timing Range:
After setting the parameter value at mode selection interface, short press ”STOP” button to set the timing range;
XXX. - timing range: 1 second to 999 seconds.
XX.X - timing range: 0.1 seconds to 99.9 seconds
X. X. X. - timing range: 1 minute to 999 minutes.
......（Vui lòng tham khảo thêm dịch vụ khách hàng）

Package list:
1 * Timer Relay Module

# Độ trễ theo chu kỳ Độ trễ hẹn giờ # Độ trễ chu kỳ Công tắc hẹn giờ # Độ trễ chu kỳ Độ trễ Chuyển tiếp # Độ trễ khi tắt Mô-đun chuyển tiếp # Độ trễ khi tắt Rơle hẹn giờ